Home › Converters › Inches to Feet
Inches to Feet
A form asks for your height in feet, your driver's license says 70 inches, and the two do not obviously match. This inches to feet converter does the one-step division for you, instantly and exactly — 12 inches make a foot, so there is never any rounding in the factor. It also converts feet back to inches, and the unit boxes cover millimeters through miles.
Inches to feet table
Everyday inch measurements in decimal feet, using 1 foot = 12 inches exactly. The converter above also handles millimeters, centimeters, meters, kilometers, yards and miles — pick any two units in the From and To boxes.
| Inches (in) | Feet (ft) |
|---|---|
| 1 in | 0.083 ft |
| 3 in | 0.25 ft |
| 6 in | 0.5 ft |
| 9 in | 0.75 ft |
| 12 in | 1 ft |
| 18 in | 1.5 ft |
| 24 in | 2 ft |
| 30 in | 2.5 ft |
| 36 in | 3 ft |
| 48 in | 4 ft |
| 60 in | 5 ft |
| 66 in | 5.5 ft |
| 70 in | 5.833 ft |
| 72 in | 6 ft |
| 84 in | 7 ft |
| 96 in | 8 ft |
| 120 in | 10 ft |
How it works
Inches and feet are partners in the US customary system: a foot is defined as 12 inches, a yard as 3 feet, and a mile as 5,280 feet. Heights are the most common reason to convert — Americans quote height as feet and inches ("five foot ten"), while forms, medical charts and product specs often record the same height as a single number of inches. Furniture, TVs, lumber and ceilings create the same need: a bookcase listed as 72 inches tall is a 6-foot bookcase, and you need to know that before it meets your ceiling.
Because 12 is the whole definition, converting is pure division: inches ÷ 12 = feet. The result is usually a decimal — 70 inches is 5.833 feet — and the converter shows it to the decimal places you pick.
To write a result as feet and inches instead of decimal feet, take the whole number of the division as the feet and multiply the leftover fraction by 12 to get the inches. 70 inches ÷ 12 = 5.833 feet: the 5 is your feet, and 0.833 × 12 = 10, so 70 inches is 5 feet 10 inches. The most common error is reading the decimal as inches — 5.833 feet is not 5 feet 8 inches, and 5.5 feet is 5 feet 6 inches, not 5 feet 5 inches. Decimal feet are a fraction of a foot, never a count of inches.
Worked example
A school nurse measures a student at 70 inches and has to record the height in feet and inches on a sports form.
Step 1: Write down the height — 70 inches.
Step 2: Use the conversion factor — 1 foot = 12 inches.
Step 3: Divide: 70 ÷ 12 = 5.833333.
Step 4: Round to three decimal places — 5.833 feet.
The converter shows exactly 5.833 feet. In spoken form that is 5 feet plus 0.833 × 12 = 10 inches — 5 feet 10 inches, which is what goes on the form. Working the other way, a 6-foot ceiling clearance is 6 × 12 = 72 inches.
Common mistakes and rounding
The decimal-feet trap is the big one: heights and room sizes get written as 5.10 or 6.5 and read back as "five ten" or "six five." 5.10 feet is actually 5 feet 1.2 inches; five foot ten is 5.833 feet. If a decimal foot value matters — a doorway, a ceiling, a vehicle clearance — write the feet-and-inches form out in full. The second trap is estimating: 12 inches per foot means 60 inches is exactly 5 feet, and anything you pace off in "about 6 inches" steps drifts fast over a room.
For everyday use two decimals are plenty (66 inches = 5.5 feet exactly), and heights are better recorded in feet-and-inches form, which needs no decimals at all. Keep three decimals when the number feeds another calculation, such as square footage from inch measurements.
FAQ
How many inches are in a foot?
There are exactly 12 inches in a foot — that is the definition of the foot in the US customary system. A yard is 3 feet, or 36 inches.
What is 70 inches in feet?
70 inches is 5.833 feet — better known as 5 feet 10 inches. Divide 70 by 12 to get 5.833, and the 0.833 fraction × 12 gives the 10 inches.
What is 36 inches in feet?
36 inches is exactly 3 feet — one yard. It is also the standard height of a kitchen countertop.
How do I turn inches into feet and inches?
Divide by 12. The whole number is the feet; multiply what is left over by 12 for the inches. Example: 66 inches ÷ 12 = 5.5, so 5 feet and 0.5 × 12 = 6 inches — 5 feet 6 inches.
Why is my height listed in inches on forms?
Because a single number is unambiguous. "70 inches" cannot be misread, while 5'10" gets typed as 5.10 or 510 often enough that medical and licensing systems prefer total inches.