Home › Converters › Feet to Inches

Feet to Inches

The shelf is sold as 5.5 feet wide, but your wall space, your tape measure math and the delivery form all want inches. This feet to inches converter does the single exact multiplication — 12 inches per foot — including the awkward decimal and fractional feet that trip people up. It also turns inches back into feet, and the unit boxes run from millimeters to miles.

Feet to inches table

Decimal and fractional feet in inches, using 1 foot = 12 inches exactly. The converter above also handles millimeters, centimeters, meters, kilometers, yards and miles — pick any two units in the From and To boxes.

Feet (ft)Inches (in)
0.25 ft3 in
0.5 ft6 in
1 ft12 in
1.5 ft18 in
2 ft24 in
2.5 ft30 in
3 ft36 in
4 ft48 in
5 ft60 in
5.5 ft66 in
6 ft72 in
7 ft84 in
8 ft96 in
10 ft120 in
12 ft144 in

How it works

A foot is twelve inches by definition — the oldest and simplest conversion in the US customary system. It comes up constantly because the two units serve different scales: rooms, boards and people are described in feet, while the fit of those things — a shelf in a nook, a board in a frame, a child against a growth chart — is checked in inches. Decimal feet add a wrinkle: building plans, real-estate software and product listings often state a length as 5.5 or 8.25 feet, and reading that correctly means knowing the decimal is a fraction of twelve inches, not a whole number of them.

The converter handles plain feet, decimal feet and, through the boxes, every other common length unit, converting through meters with exact factors for the metric ones.

Feet to inches: inches = feet × 12  |  Inches to feet: feet = inches ÷ 12  |  Decimal feet to feet-and-inches: whole feet stay; multiply the decimal part by 12 for the inches (0.75 ft = 9 in)

To convert, multiply the feet by 12: 8 feet is 96 inches, and 2.5 feet is 30 inches. For decimal feet, split the number: 5.75 feet is 5 whole feet plus 0.75 × 12 = 9 inches — 5 feet 9 inches. Coming back the other way, divide inches by 12: 96 inches is 8 feet exactly. A useful memory set for the workshop: 0.25 ft = 3 in, 0.5 ft = 6 in, 0.75 ft = 9 in — the quarters of a foot land on whole inches, which is why carpenters like them.

Worked example

Priya is buying a board for a closet shelf. The lumber is sold as an 8-foot board, but her cut list — measured against the closet brackets — is written in inches, so she converts before marking the cut.

Step 1: Write down the length — 8 feet.
Step 2: Use the conversion factor — 1 foot = 12 inches.
Step 3: Multiply: 8 × 12 = 96.
Step 4: Read the result — 96 inches.

The converter gives exactly 96 inches, the standard length of an 8-foot board and the height of a standard 8-foot ceiling. The decimal cases work the same way: her 5.5-foot offcut is 66 inches, ready to measure against the bracket spacing.

Common mistakes and rounding

The classic mistake is reading decimal feet as feet-and-inches: 5.5 feet is 5 feet 6 inches (66 inches), not 5 feet 5 inches — the ".5" is half of twelve inches, and getting this wrong shortens a board by an inch. The reverse mistake appears on cut lists too: 5 feet 10 inches written as "5.10 ft" computes as 61.2 inches instead of 70. If a number really matters, write it as total inches (70 in) and let the converter do the rest.

There is no rounding in the factor itself — 12 is exact — so any decimals in your result come from your input. For tape-measure work, convert to inches and then to the nearest sixteenth: 0.0625 ft is exactly 3/4 inch, a fact worth remembering when a plan gives hundredths of a foot.

FAQ

How many inches are in a foot?

Exactly 12 inches — that is the definition of a foot. Three feet (36 inches) make a yard, and 5,280 feet make a mile.

What is 5.5 feet in inches?

5.5 feet is 66 inches (5.5 × 12). In feet-and-inches form that is 5 feet 6 inches — the .5 is half a foot, and half of 12 inches is 6.

What is 8 feet in inches?

8 feet is 96 inches (8 × 12). It is also the standard ceiling height in most American homes.

How do I convert decimal feet to feet and inches?

Keep the whole number as feet and multiply the decimal part by 12. Example: 6.25 feet → 6 feet and 0.25 × 12 = 3 inches, so 6 feet 3 inches.

Why do plans use decimal feet at all?

Because decimals are easier to add, subtract and feed into software than fractions of inches. Surveyors and engineers work in decimal feet for that reason; carpenters then convert back to feet and inches at the saw.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.