Home › Converters › MM to Inches
MM to Inches
You found the perfect part, lens or piece of furniture online — but every measurement is in millimeters and your tape measure reads inches. This mm to inches converter fixes that in one step: type the millimeters, get the inches, using the exact factor of 25.4 mm per inch. It works in reverse too, and the unit boxes let you convert between millimeters, centimeters, meters, kilometers, inches, feet, yards and miles.
Millimeters to inches table
The most common mm sizes and their exact inch equivalents, using 1 inch = 25.4 mm. The converter above also handles centimeters, meters, kilometers, feet, yards and miles — pick any two units in the From and To boxes.
| Millimeters (mm) | Inches (in) |
|---|---|
| 1 mm | 0.039 in |
| 5 mm | 0.197 in |
| 10 mm | 0.394 in |
| 20 mm | 0.787 in |
| 25.4 mm | 1 in |
| 50 mm | 1.969 in |
| 75 mm | 2.953 in |
| 100 mm | 3.937 in |
| 150 mm | 5.906 in |
| 200 mm | 7.874 in |
| 250 mm | 9.843 in |
| 300 mm | 11.811 in |
| 500 mm | 19.685 in |
| 1,000 mm | 39.37 in |
How it works
Millimeters are the precision unit of the metric system: a credit card is 85.6 mm wide, a standard pencil is about 175 mm long, and the thickness of a smartphone is often given as 8 mm or less. Inches do the same job in the United States, where rulers, screens and lumber are still measured in inches and fractions of inches. Any time a product is designed or manufactured outside the US — camera lenses, bicycle parts, 3D printer filament and nozzles, drill bits, phone cases, imported furniture — its dimensions arrive in millimeters and need converting before they mean anything next to American tools and shelves.
The two units are linked by an exact definition, agreed internationally in 1959: one inch is exactly 25.4 millimeters. Because the factor is a definition rather than a measurement, it never drifts and never needs rounding — the only rounding in any result is the decimal places you choose to display.
To convert millimeters to inches, divide the millimeter value by 25.4. To go the other way, multiply the inches by 25.4. For everyday jobs, three decimal places are more than enough: 100 mm is 3.937 inches and 50 mm is 1.969 inches. For machining, 3D printing or anything that has to fit inside something else, keep four or more decimals — a tenth of a millimeter is about four thousandths of an inch, which is enough to make a printed part too tight. The other units in the boxes all convert through meters using exact factors (1 inch = 0.0254 m, 1 foot = 0.3048 m, 1 mile = 1,609.344 m), so every pair the converter offers is exact.
Worked example
Tom in Ohio is ordering a replacement drawer slide for a European cabinet. The listing gives the slide length as 400 mm, and he needs to check it against the 16-inch drawer box he already has.
Step 1: Write down the length — 400 mm.
Step 2: Use the conversion factor — 1 inch = 25.4 mm.
Step 3: Divide: 400 ÷ 25.4 = 15.7480315.
Step 4: Round to three decimal places — 15.748 inches.
That is exactly what the converter shows for 400 mm: 15.748 inches, so the slide is about a quarter of an inch shorter than his 16-inch drawer box and fits with room to spare. Working backwards, a 12-inch ruler is 12 × 25.4 = 304.8 mm long.
Common mistakes and rounding
The most common error is using 25 instead of 25.4 as the factor. Over a few millimeters the difference is invisible, but it grows with length: 1,000 mm is 39.370 inches with the correct factor and a full 40 inches with the rounded one — an error of more than half an inch, enough to ruin a cut or a printed part. The second classic mistake is mixing up millimeters and centimeters. Ten millimeters make one centimeter, so 25 mm (one inch) and 25 cm (nearly ten inches) are wildly different sizes, and product listings use both. Always read the unit symbol before converting.
For rounding: two decimal places suit everyday measuring (50 mm = 1.97 inches), three decimals — thousandths of an inch — suit woodworking and machining, and fractions suit carpentry, where 0.236 inches is easier to read as 15/64 inch on a tape measure. Remember also that this is a length conversion only: square millimeters to square inches uses 645.16, not 25.4.
FAQ
How many inches is 100 mm?
100 mm is 3.937 inches. Divide the millimeters by 25.4: 100 ÷ 25.4 = 3.93700787, which rounds to 3.937 inches at three decimal places.
Is 25 mm exactly 1 inch?
No — it is close, but not exact. One inch is exactly 25.4 mm, so 25 mm is 0.984 inches. The missing 0.4 mm rarely matters for household measuring, but it matters for parts that must fit together.
What is 6 mm in inches?
6 mm is 0.236 inches (6 ÷ 25.4 = 0.23622). On a tape measure that sits just under a quarter inch — the closest common fraction is 15/64 inch.
How do I convert mm to inches by hand?
Divide the millimeter value by 25.4. For a rough estimate, divide by 25 instead — 100 mm ÷ 25 = 4 inches against the exact 3.937 — then adjust down a little. The shortcut is fine for guessing, but use 25.4 for anything you plan to cut or order.
Why are so many products sized in mm in the US?
Because most manufacturing is global. Camera lenses, bicycle tires, printer nozzles, drill bits, screws and phone cases are designed in metric countries, so their sizes are set in millimeters even when they are sold in the United States.