Home › Converters › Inches to MM
Inches to MM
Your drill bit set is marked in inches, the replacement part is sold in millimeters, and the two sets refuse to line up. This inches to mm converter removes the guesswork with the exact 25.4 factor — multiply once and you have the millimeter size. It converts back just as easily, and the unit boxes also cover centimeters, meters, kilometers, feet, yards and miles.
Inches to millimeters table
Common inch sizes — including the fractions used for drill bits and fasteners — in millimeters, using 1 inch = 25.4 mm exactly. The converter above also handles centimeters, meters, kilometers, feet, yards and miles.
| Inches (in) | Millimeters (mm) |
|---|---|
| 0.25 in | 6.35 mm |
| 0.5 in | 12.7 mm |
| 0.75 in | 19.05 mm |
| 1 in | 25.4 mm |
| 1.5 in | 38.1 mm |
| 2 in | 50.8 mm |
| 2.5 in | 63.5 mm |
| 3 in | 76.2 mm |
| 4 in | 101.6 mm |
| 5 in | 127 mm |
| 6 in | 152.4 mm |
| 8 in | 203.2 mm |
| 10 in | 254 mm |
| 12 in | 304.8 mm |
How it works
The inch is the working unit of American workshops; the millimeter is the working unit of almost everyone else's. Fasteners, drill bits, printer parts, bike components and electronics are specified in millimeters even when sold in the US, while American plans and hardware are drawn in inches and inch fractions. Converting between them is a daily task in machining, 3D printing, woodworking and repair.
The bridge between the two is exact: since 1959, one inch has been defined as exactly 25.4 millimeters. So inches to millimeters is a single multiplication by 25.4, with no approximation in the factor itself — only in how many decimals you keep.
To convert, multiply the inch value by 25.4: 2 inches is 50.8 mm, and a 3/8-inch drill bit (0.375 in) is 0.375 × 25.4 = 9.525 mm. Fractions are where people slip — always turn the fraction into a decimal first (3/8 = 0.375), then multiply. For fractional work, three decimals of a millimeter is the practical limit of most calipers: a result of 9.525 mm means a 9.5 mm bit is the closest metric size, slightly smaller, while a 10 mm bit is slightly larger. The converter also works through meters for the other units in the boxes — 1 inch = 0.0254 m exactly — so centimeters, feet and yards all convert exactly too.
Worked example
A replacement caster wheel for a workshop cart is listed by its American maker as 2.5 inches in diameter. The mounting bracket Ben is fitting it to is specified in millimeters, so he converts before ordering.
Step 1: Write down the size — 2.5 inches.
Step 2: Use the conversion factor — 1 inch = 25.4 mm.
Step 3: Multiply: 2.5 × 25.4 = 63.5.
Step 4: Read the result — 63.5 mm.
The converter gives exactly 63.5 mm, which matches the bracket's 63.5 mm recess, so he orders with confidence. The everyday anchors check out the same way: a 6-inch photo print is 152.4 mm wide, and a 12-inch ruler is 304.8 mm long.
Common mistakes and rounding
The biggest source of error is fractions: 5/16 inch is 0.3125, not 0.316, and multiplying the wrong decimal by 25.4 gives a confidently wrong millimeter value. Convert the fraction carefully first. The second trap is "close enough" metric substitutions. A 1/4-inch bolt is 6.35 mm, but a 6 mm bolt is not the same part — it is 0.35 mm slimmer and will fit loosely. For fasteners and bearings, convert exactly and match the specified size, not the nearest one.
Round to one decimal for household jobs (a 4-inch print is 101.6 mm), and keep two or three decimals for machining and printing, where 0.1 mm changes a fit. If your result ends in a long string of decimals, it is usually a fraction in disguise: 19.05 mm is exactly 3/4 inch.
FAQ
How many mm is 1 inch?
Exactly 25.4 mm. The inch has been defined as 25.4 millimeters since 1959, so the factor is exact, not a measurement.
What is 1/2 inch in mm?
Half an inch is 12.7 mm (0.5 × 25.4). It is one of the most common fastener and pipe sizes in both systems.
What is 3/8 inch in mm?
3/8 inch is 9.525 mm. First turn the fraction into a decimal — 3 ÷ 8 = 0.375 — then multiply by 25.4: 0.375 × 25.4 = 9.525.
What is 6 inches in mm?
6 inches is 152.4 mm (6 × 25.4) — the long side of a standard 4×6 photo print.
How do I convert inches to mm by hand?
Multiply the inches by 25.4. For fractions, convert to a decimal first. For a rough estimate, multiply by 25 and add about 1.5%: 4 inches × 25 = 100, plus a little, against the exact 101.6 mm.