Home › Converters › ATM to PSI Converter
ATM to PSI Converter
A dive table, a chemistry problem, or a pressure-vessel spec states a pressure in atmospheres, but every gauge, compressor, and tire pump you own reads psi. This free atm to psi converter switches between them instantly, and it also converts bar, kilopascals, millibars, mmHg, and kg/cm² in either direction, so whichever unit a document uses, the number lands on the scale your equipment shows.
The line under the result shows the same pressure in kPa and bar too — the units on most spec sheets.
ATM to psi conversion table
Pressures from sea level to industrial vessels — atmospheres converted to psi and bar.
| Atmospheres (atm) | PSI | Bar |
|---|
How it works
An atmosphere is a definition, not a measurement: one standard atmosphere is exactly 101,325 pascals, the average pressure of Earth's air at sea level. A psi is one pound of force on one square inch, equal to 6,894.757293168 pascals. Dividing the two definitions gives the exact bridge: 1 atm = 101,325 ÷ 6,894.757293168 = 14.6959488 psi. This converter uses psi as its base unit, so any pair works — atm to mmHg, bar to kPa — through one shared set of factors.
Atmospheres appear wherever pressure is counted in multiples of the air around us: scuba diving, where every 33 feet of seawater adds roughly one more atmosphere; chemistry, where gas reactions are specified at 1 atm; and pressure vessels and autoclaves rated in whole atmospheres. Psi appears wherever a gauge does the talking. Being able to flip between the two — 3 atm of process pressure is 44.0878 psi on the plant gauge — is what keeps a spec sheet and a dial telling the same story.
Enter the amount, pick the from and to units, and the answer updates as you type. The line underneath restates the result and adds the same pressure in kilopascals and bar, the units on most European spec sheets. Use the swap button to reverse the direction, for example when a gauge reading in psi has to be reported in atmospheres.
Worked example
A recreational diver plans a reef dive to 33 feet and wants to know the total pressure at depth, in the psi her dive computer displays. Step 1: at 33 feet down, the water adds about 1 atm on top of the 1 atm of air at the surface — 2 atm total. Step 2: multiply by the factor — 2 × 14.6959488 = 29.3919. Step 3: read the result — at 33 feet she is under 29.3919 psi of total pressure, almost exactly double the 14.6959 psi pressing on her at the beach. That doubling is why ears need equalizing early and often on the way down.
Common mistakes
The most common mistake is treating atm and bar as the same unit: 1 atm is 1.01325 bar, so the swap quietly adds or drops about 1.3% — invisible on a tire, meaningful in a lab or a pressure-vessel calculation. The second mistake is forgetting gauge versus absolute pressure. Atmospheres here are absolute; a tire gauge reads pressure above the surrounding air (psig), so a tire at "2 atm" of gauge pressure is really under about 3 atm absolute. This converter translates units only; it does not switch between gauge and absolute.
FAQ
How many psi are in 1 atm?
One standard atmosphere is 14.6959 psi (14.6959488, to be precise). That is the pressure of the air at sea level on an average day, expressed in pounds per square inch. So 2 atm is 29.3919 psi and 3 atm is 44.0878 psi.
What is 2 atm in psi?
2 atm is 29.3919 psi (2 × 14.6959488). A diver 33 feet under the sea experiences about 2 atm of total pressure — 1 atm of air above plus 1 atm of water — which is that same 29.3919 psi pressing on every square inch.
What is the difference between atm and bar?
They are close but not equal. One bar is exactly 100,000 pascals; one atmosphere is defined as exactly 101,325 pascals, so 1 atm = 1.01325 bar. Treating them as identical quietly introduces an error of about 1.3% — small, but real in engineering work.
Why is sea-level air pressure 14.7 psi?
Because a standard atmosphere was defined as the average pressure of Earth's air at sea level, and in imperial units that pressure works out to 14.6959 pounds on every square inch — usually rounded to 14.7 psi. Every pressure gauge you pick up is silently comparing its reading against roughly this number.
How do you convert atm to psi?
Multiply the atmospheres by 14.6959488. For example, 2.5 atm × 14.6959488 = 36.7399 psi. To convert psi back to atmospheres, divide by the same factor: 50 psi ÷ 14.6959488 = 3.4023 atm.