Home › Converters › Bar to Psi

Bar to Psi

Your car’s door sticker, a European tire pump, or an espresso machine’s gauge reads in bar, but your pressure gauge, your compressor manual, and every US spec sheet read in psi — and tire and line pressures are not numbers to guess at. This bar to psi converter translates instantly with the exact factor, works in both directions, and also converts kilopascals, pascals, megapascals, millibars, atmospheres, torr, and inches of mercury.

14.50377 pounds per square inch
1 bar × 14.5037738 = 14.50377 pounds per square inch  •  100 kilopascals

Bar to psi conversion table

BarPsiKilopascals
0.11.4503810
0.57.2518950
114.50377100
1.521.75566150
229.00755200
2.536.25943250
343.51132300
458.0151400
572.51887500
7101.52642700
10145.037741,000

How it works

Bar and psi both measure pressure — force spread over area — but they come from different systems. The bar is the metric-friendly unit used across Europe for tires, weather, and espresso machines; psi, pounds per square inch, is the US standard on gauges, compressors, and tire sidewalls. The Amount box takes the pressure you have, the From list sets its unit, and the To list sets the unit you want, with bar and psi pre-selected. The result updates as you type, and the Swap units button reverses the conversion.

All the units here convert through bar: 1 bar is exactly 100,000 pascals, so kilopascals and megapascals fall out cleanly, and the atmosphere is defined as exactly 1.01325 bar. That one box therefore covers a bicycle tire, a scuba tank, a weather map in millibars, and a blood-pressure reading in torr (millimeters of mercury, the same thing).

Psi = bar × 14.5037738  |  Bar = psi ÷ 14.5037738  |  1 bar = 100 kPa = 100,000 Pa exactly · 1 atm = 1.01325 bar · 1 psi = 0.0689476 bar
The factor comes from the definitions: a bar is 100,000 newtons per square meter, and a psi is a pound of force on a square inch; dividing one by the other gives 14.5037738 psi per bar. Two anchors make most real jobs easy to sanity-check: car tires live around 2.2 to 2.5 bar (about 32 to 36 psi), and sea-level air pressure is about 1.013 bar (about 14.7 psi). If your result for a car tire lands anywhere far from the low thirties in psi, the conversion went the wrong way.

Worked example

Sofia’s hatchback, bought in Germany, lists its tire pressure on the door sticker as 2.5 bar, but the gauge on her home compressor in Chicago reads only psi. She converts before she tops up the tires.

Step 1: Write down the pressure in bar — 2.5 bar.
Step 2: Use the factor — 1 bar = 14.5037738 psi.
Step 3: Multiply: 2.5 × 14.5037738 = 36.25943.
Step 4: Read the result — 36.25943 psi.

The converter gives exactly 36.25943 psi for 2.5 bar, and shows 250 kilopascals alongside — the figure her car’s digital display uses. She sets the compressor to 36 psi, right where the sticker intends.

Common mistakes and rounding

The first trap is gauge versus absolute pressure. A tire gauge reads pressure above the surrounding air (gauge), while weather and physics figures are often absolute; the difference is one atmosphere, about 1.013 bar or 14.7 psi. A straight unit conversion like this page does not add or remove that offset — convert the number you have, in the kind you have it. The second trap is the bar’s near-twin, the atmosphere: at 1.01325 bar they are close enough to confuse on a gauge face, but the 1.3 percent gap matters in diving and process work.

For tires and home compressors, whole psi is plenty. Keep two or more decimals for calibration, espresso extraction (where 9 bar is the classic brew pressure, 130.53396 psi), and anything involving scuba or hydraulics, where small errors multiply.

FAQ

How many psi are in 1 bar?

1 bar is 14.5037738 psi, which this converter rounds to 14.50377 psi at five decimal places. So 2 bar is 29.00755 psi and 3 bar is 43.51132 psi.

How many bar is 1 psi?

1 psi is 0.0689476 bar (1 / 14.5037738). A typical US tire pressure of 32 psi is therefore about 2.20632 bar, and 100 psi is about 6.89476 bar.

What is 2.2 bar in psi?

2.2 bar is 31.9083 psi (2.2 x 14.5037738 = 31.90830236, rounded to four decimals here). That is a very common car tire pressure on European door stickers — about 32 psi.

Is 1 bar the same as 1 atmosphere?

Not exactly. 1 atmosphere is defined as 1.01325 bar, so a bar is about 1.3 percent less than an atmosphere. Sea-level standard air pressure is 1 atm = 1.01325 bar = 14.6959 psi.

How do I convert psi back to bar?

Divide the psi by 14.5037738, or press the Swap units button. For example, 36 psi / 14.5037738 = 2.48211 bar, and 100 psi is 6.89476 bar.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.