Home › Math & Science › Torus Volume Calculator

Torus Volume Calculator

A torus — the donut shape — turns up in swim rings, tires, pipe bends, bagels and O-rings, and its volume is impossible to guess because so much of the bounding space is hole. This free torus volume calculator needs only the major radius and the tube radius, and returns the volume and surface area in metric or imperial units.

—

How it works

A torus is generated by taking a circle of radius r — the tube — and sweeping it around a center point at distance R, the major radius. Think of it as a tube bent into a closed ring. Because the tube's cross-section stays the same all the way around, the volume is the tube's cross-section area multiplied by the length of the circle its center travels, which collapses neatly into one formula.

Volume V = 2 × π² × R × r²  ·  Surface area A = 4 × π² × R × r

The major radius R runs from the center of the hole to the center of the tube — not to the outside edge. The minor radius r is the radius of the tube itself, half its thickness. Together they fix everything about the shape: the outside diameter is 2 × (R + r) and the hole diameter is 2 × (R − r). If the tube radius grows larger than the major radius, the tube overlaps itself and the donut becomes a self-intersecting spindle torus — the formulas still return values, so this tool shows them with a clear warning rather than pretending the shape is a normal ring.

Worked example

A donut-shaped cushion has a major radius of 10 cm and a tube radius of 3 cm. Step 1: square the tube radius — 3² = 9. Step 2: multiply by 2 × π² and by the major radius — 2 × π² × 10 × 9 = 1,776.53 cm³, about 1.777 liters of filling. The surface area is 4 × π² × 10 × 3 = 1,184.35 cm². The finished cushion measures 2 × (10 + 3) = 26 cm across, with a hole 2 × (10 − 3) = 14 cm wide. Enter major radius 10 and minor radius 3 above and the calculator shows the same figures.

Tips for measuring real rings

You rarely measure R directly. Measure the full outside diameter and the tube thickness instead: the tube radius is half the thickness, and the major radius is half the outside diameter minus the tube radius. For inflatables and tires, measure at working pressure — a soft tube measured flat understates r and the volume follows r squared, so the error doubles up. For a ring that is not perfectly circular in cross-section, like a car tire, the torus result is a close approximation rather than an exact figure.

FAQ

What is the difference between the major and minor radius of a torus?

The major radius R is the distance from the center of the whole donut to the center of the tube — half the width of the ring measured to the middle of the tube. The minor radius r is the radius of the tube itself — half the tube's thickness. Add them and double to get the overall outside diameter: 2 × (R + r). Subtract them and double for the hole: 2 × (R − r). Mixing the two up is the most common torus mistake, because both are legitimately called the radius of something.

How do you calculate the volume of a torus?

Use V = 2 × π² × R × r², where R is the major radius and r is the minor (tube) radius. For a torus with R = 10 cm and r = 3 cm: 2 × π² × 10 × 9 = 1,776.53 cm³. The formula is Pappus's centroid theorem in disguise — the tube's cross-section area (π × r²) travels around a circle of circumference 2 × π × R, and multiplying the two gives exactly this result.

What is the surface area of a torus?

A = 4 × π² × R × r. The tube's surface unwraps, in effect, to its circumference (2 × π × r) multiplied by the distance it travels (2 × π × R). For R = 10 cm and r = 3 cm that is 4 × π² × 10 × 3 = 1,184.35 cm². Surface area is the figure you want for painting, coating or wrapping a ring, tire or inflatable tube.

What happens if the minor radius is bigger than the major radius?

The shape stops being a donut. When r is larger than R, the tube swallows the center completely and the surface passes through itself, making what geometers call a spindle torus. The volume and area formulas still return numbers, and this calculator shows them, but it flags the result with a warning because a self-intersecting shape is not something you can build, print or fill as a single solid. When r exactly equals R, the hole closes to a single point — a horn torus.

How do I measure a real ring or tire as a torus?

Measure the outside diameter across the whole ring and the thickness of the tube. The tube radius r is half the thickness, and the major radius R is half the outside diameter minus r. Example: a swim ring 60 cm across with a 20 cm thick tube has r = 10 cm and R = 30 − 10 = 20 cm, so its volume is 2 × π² × 20 × 100 = 39,478.42 cm³, about 39.5 liters of air.

Disclaimer: Results assume a perfect torus with a circular tube cross-section and are estimates for planning. When the minor radius exceeds the major radius the shape self-intersects (a spindle torus) and the figures are formal values only.