Home › Converters & Everyday › EV Charging Time Calculator
EV Charging Time Calculator
Plug in tonight and you need to know one thing: will the car be ready by morning? This free EV charging time calculator works it out from your battery size, the charge you have now, the charge you want, and your charger's power — from a slow Level 1 cord to a 250 kW DC fast charger — and can price the session from your electricity rate.
The currency only changes the symbol and formatting — it never converts amounts.
How it works
Three steps, all visible. First, the energy your battery actually gains: battery size times the percentage gap — a 60 kWh battery going from 20% to 80% gains 60 × 0.60 = 36 kWh. Second, the energy you draw from the wall: charging is not lossless, so the drawn energy is the stored energy divided by the efficiency — at 90% efficiency, 36 ÷ 0.90 = 40 kWh comes out of your meter. Third, time is energy divided by power: 40 kWh on a 7.7 kW wallbox is 40 ÷ 7.7 ≈ 5.19 hours. The price, if you enter one, is charged on the drawn energy, because that is what your meter measures.
The preset list covers the chargers people actually meet: the 1.4 kW portable cord that comes with many cars, home wallboxes at 3.6 to 22 kW, and public DC fast chargers at 50, 150 and 250 kW. If your charger is not listed, pick Custom and type its rating — it is printed on the unit and in its app. Remember the car can be the bottleneck: the estimate assumes the car can accept the full power you selected for the whole session.
Worked example
A 60 kWh crossover sits at 20% and you want 80% by morning, on a 7.7 kW home wallbox at 90% efficiency. Step 1: energy to store = 60 × (80 − 20) ÷ 100 = 36 kWh. Step 2: energy drawn = 36 ÷ 0.90 = 40 kWh. Step 3: time = 40 ÷ 7.7 = 5.19 hours, shown as 5 hours 12 minutes. Step 4: at $0.30 per kWh the session costs 40 × $0.30 = $12.00. Enter those figures above and the calculator shows the same result.
Why real sessions run longer
Charging power is not constant. Almost every EV tapers — it accepts full power when the battery is low and eases off as it fills, sharply so above about 80 percent, which is why fast-charge stops are usually planned to 80 percent. Cold batteries charge slowly until they warm, and a shared public charger may split its power between two cars. This calculator gives the clean, constant-power estimate so you can compare chargers and plan; add a cushion of 15 to 30 minutes for a full charge or a cold night.
FAQ
How long does it take to charge an EV at home?
It depends on the battery and the charger. A 60 kWh battery going from 20% to 80% needs 36 kWh stored; on a typical 7.7 kW home wallbox at 90% efficiency that takes about 5 hours 12 minutes. The same charge on a 1.4 kW portable Level 1 cord takes about 28 hours 34 minutes — which is why most owners who drive daily install a wallbox.
Why does this calculator ask for charging efficiency?
Because not every kilowatt-hour you pay for ends up in the battery. The car's charger converts AC to DC and loses some energy as heat, so at 90% efficiency you draw about 1.11 kWh from the wall for every 1 kWh stored. Home AC charging is usually 85 to 95 percent efficient; DC fast charging is a little better. The estimate uses your efficiency figure for both the time and the cost.
Why do people charge from 20% to 80% instead of 0% to 100%?
Battery health and speed. Lithium batteries age fastest at the extremes, so daily charging between about 20% and 80% is the kindest routine, and charging slows down a lot near full — the last 20 percent can take as long as the first 60 on a fast charger. Charge to 100 percent when you actually need the range for a trip, and use 20 to 80 for everyday estimates like the default here.
Why is my real charging session slower than the estimate?
This estimate assumes the car draws the charger's rated power from start to finish. In reality, charging tapers: cars reduce power as the battery fills, especially on DC fast chargers above 80 percent, and cold batteries charge slowly until they warm up. The car itself can also be the limit — a car that accepts at most 50 kW gains nothing from a 250 kW charger. Treat the result as a best-case plan, not a promise.
How much does a home charging session cost?
Multiply the energy drawn from the wall by your electricity price. The default example here — 40 kWh drawn at $0.30 per kWh — costs $12.00 for 36 kWh stored. Enter your own price per kWh above and pick your currency; the selector changes only the symbol and formatting, never the amounts.