Home › Converters › KWH to BTU
KWH to BTU
Your electric bill counts energy in kilowatt-hours, but furnaces, water heaters and air conditioners are all rated in BTU — so comparing an electric appliance with a gas one means translating first. This kWh to BTU converter does it instantly with the exact factor, and also handles joules, kilocalories and watt-hours, with a full breakdown so you can see the same energy in every unit at once.
kWh to BTU conversion table
| Kilowatt-hours (kWh) | BTU | Kilocalories (kcal) |
|---|---|---|
| 0.5 | 1,706.07 | 430.21 |
| 1 | 3,412.14 | 860.42 |
| 2 | 6,824.28 | 1,720.84 |
| 5 | 17,060.71 | 4,302.10 |
| 10 | 34,121.42 | 8,604.21 |
| 29.3 | 99,975.75 | 25,210.33 |
| 100 | 341,214.16 | 86,042.07 |
How it works
Both units measure the same thing — energy — but they grew up on different sides of the power meter. The kilowatt-hour is electrical: one kilowatt of power, sustained for one hour, is exactly 3,600,000 joules. The BTU (British thermal unit) is thermal: the heat that raises a pound of water by one degree Fahrenheit, fixed at 1,055.05585262 joules. Divide one by the other and you get the exact conversion this tool uses.
The Energy box takes any amount you type, the From list sets the unit you are starting with, and the To list sets the unit you want — kilowatt-hours and BTU are pre-selected. Everything converts through joules, and the breakdown under the result shows the same energy six ways at once. One caution the tool cannot make for you: appliance labels usually quote BTU per hour, a rate, not a plain BTU amount. If a heater is rated 10,000 BTU/h and runs for 2 hours, enter 20,000 BTU — the hours have to be multiplied in first.
Worked example
A homeowner in Texas used 2 kWh of electricity in a space heater last night and wants to know how much heat that actually delivered, in the BTU her gas furnace is rated by. Step 1: write down the amount — 2 kWh. Step 2: use the exact factor — 1 kWh = 3,412.14163 BTU. Step 3: multiply: 2 × 3,412.14163 = 6,824.28 BTU of heat. Type 2 kWh into the converter and it shows exactly that. An electric heater turns essentially all of its electricity into heat, so the translation is honest in both directions.
Common mistakes
The classic error is comparing a BTU/h rating directly to a kWh count: one is a speed, the other is a total. A 36,000 BTU/h air conditioner sounds enormous next to a 10 kWh battery until you do the time math — the AC moves about 10.55 kWh of heat per hour, and it does not consume that much electricity, because it moves heat rather than making it. The second trap is the therm on gas bills: 1 therm = 100,000 BTU ≈ 29.3 kWh, so a 50-therm winter month is roughly 1,465 kWh of gas energy — the only honest basis for comparing gas and electric heating costs.
FAQ
How many BTU are in a kWh?
One kilowatt-hour is 3,412.14163 BTU. A kilowatt-hour is exactly 3,600,000 joules and one BTU is 1,055.05585262 joules, so dividing gives 3,412.14163. That is why a 10 kWh charge on an EV battery holds about 34,121 BTU of energy.
How many kWh are in a BTU?
One BTU is about 0.000293071 kWh — a very small slice, because the BTU is a much smaller unit. Multiply BTU by 0.000293071 to get kilowatt-hours: a furnace rated at 100,000 BTU of heat output delivers the energy equivalent of about 29.3 kWh.
Is a BTU the same as BTU per hour?
No — this is the most common mix-up in heating and cooling. A BTU is an amount of energy; BTU per hour (BTU/h) is a rate, the speed at which a heater or air conditioner moves that energy. Appliance ratings are almost always BTU/h. A 12,000 BTU/h air conditioner running for one hour moves 12,000 BTU, which is 3.517 kWh of heat.
How many BTU is a ton of air conditioning?
One ton of cooling is 12,000 BTU per hour, a historical measure from the era of ice delivery. In energy terms, moving 12,000 BTU in an hour is 3.517 kWh of heat removed per hour of running. A typical 3-ton home system is therefore a 36,000 BTU/h unit, moving about 10.55 kWh of heat per hour.
Why does my electric bill use kWh instead of BTU?
Because your meter measures electrical energy, and the kilowatt-hour is the natural unit for it: one kilowatt of power sustained for one hour. Gas bills in the US often use therms instead — one therm is 100,000 BTU, or about 29.3 kWh. This converter lets you translate between the two worlds, which is the only fair way to compare an electric heater with a gas furnace.