Home › Math & Science › PH Calculator

PH Calculator

pH problems always arrive wearing a concentration in scientific notation — or the other way around — and the log step in between is where the marks get lost. This free pH calculator works both directions: enter a hydrogen ion concentration and get pH, pOH and the hydroxide concentration, or enter a pH and get the concentrations back, with an honest acidic, neutral or alkaline label on every answer.

Together these read as [H⁺] = coefficient × 10^power mol/L — the way concentrations are printed in textbooks. 0.001 mol/L is coefficient 1, power −3.

—

How it works

pH measures the concentration of hydrogen ions, [H⁺], in a solution, squeezed onto a friendly scale by a logarithm. The concentration itself is almost always tiny — pure water holds just 0.0000001 moles of H⁺ per liter — so the scale swaps the unwieldy number for its exponent: pH is the negative base-10 log of the concentration. The same trick on the hydroxide side gives pOH, and because water's own chemistry links the two ions, pH + pOH = 14 at 25 °C. Every quantity on this page is computed from those three relationships and nothing else.

pH = −log₁₀[H⁺]  ·  pOH = 14 − pH  ·  [H⁺] = 10^(−pH)  ·  [OH⁻] = 10^(−pOH)

The concentration mode takes the coefficient and the power of ten separately, exactly as textbooks print them: 3.2 × 10⁻⁵ mol/L is coefficient 3.2, power −5. That split is what lets the tool stay exact for very small concentrations where a single decimal box would drown in zeros. The classification — acidic below 7, neutral at 7, alkaline above — is read against the 25 °C neutral point, and if your concentration produces a pH outside 0–14 the tool shows it and says so: strong lab acids and bases really live out there, and clamping the answer would be lying.

Worked example

A solution has a hydrogen ion concentration of 0.001 mol/L. Step 1: write it in scientific notation — 0.001 = 1 × 10⁻³ mol/L. Step 2: take the base-10 log — log₁₀(10⁻³) = −3. Step 3: negate it — pH = 3, an acidic solution (lemon juice territory). The partners follow: pOH = 14 − 3 = 11, and [OH⁻] = 10⁻¹¹ mol/L. Enter coefficient 1 and power −3 above and the calculator shows the same figures.

Common mistakes

The classic slip is dropping the negative sign: log of a tiny concentration is a negative number, and pH is defined as the negative of that log, so the two negatives cancel into the familiar positive scale. The second trap is reading the scale as linear — pH 3 is not a little more acidic than pH 4, it is ten times more concentrated in H⁺, and pH 2 is a hundred times. Finally, do not average pH values: the average of pH 3 and pH 5 is not pH 4 in any chemical sense, because you would have to average the concentrations (10⁻³ and 10⁻⁵) and convert back, which lands near pH 3.3.

FAQ

How do you calculate pH from concentration?

Take the negative base-10 logarithm of the hydrogen ion concentration in moles per liter: pH = −log₁₀[H⁺]. A concentration of 0.001 mol/L is 10⁻³, the log is −3, and the negative of that is pH 3. Every whole pH step is a tenfold change in concentration, which is why the scale feels compressed.

What is the pH of pure water?

Seven, at 25 °C. Pure water ionizes very slightly, giving a hydrogen ion concentration of 1 × 10⁻⁷ mol/L, and −log₁₀(10⁻⁷) = 7. Neutral does not mean the water has no H⁺ in it — it means the H⁺ and OH⁻ concentrations are equal. Note the honest catch: at other temperatures the neutral point shifts a little, because the ionization of water changes with heat.

What are pOH and hydroxide concentration used for?

pOH is the mirror of pH for the hydroxide ion: pOH = −log₁₀[OH⁻], and in water at 25 °C the two always add to 14. Chemists use whichever side is easier to measure — a solution can be described completely by any one of pH, pOH, [H⁺] or [OH⁻], and this calculator shows all four from any one of them.

Can pH be below 0 or above 14?

Yes. The 0–14 range is a rule of thumb, not a law. Concentrated hydrochloric acid at 10 mol/L has a pH of −1, and strong bases can pass 14. This calculator does not clamp your answer into 0–14; it shows the honest value and flags when it falls outside the familiar range. Most everyday liquids — rain, food, blood, soap — sit comfortably inside it.

Why does temperature matter for pH?

Because pH is built on the ionization of water, and that ionization grows with temperature. Neutral water at 50 °C has a pH near 6.6 and is still neutral — acids and bases are defined against the neutral point, not against the number 7. The pH + pOH = 14 relationship in this calculator is the standard 25 °C version, which is what school, lab and pool testing all assume.

Disclaimer: Results assume dilute water-based solutions at 25 °C and are for study and planning. Real solutions — concentrated, non-aqueous, or measured at other temperatures — can differ; for lab or process work, verify with a calibrated pH meter.