Home › Math & Science › Percent Increase Calculator
Percent Increase Calculator
Prices, salaries, rents, and test scores are always changing — but by what percent? This free percent increase calculator answers that from any two values, labels the result clearly as an increase or a decrease, and also runs in reverse: give it a starting value and a percent change, and it finds the final value.
Example: a price that went from $80 to $100. Works for decreases too — just enter the lower value second.
Use a positive percent for an increase and a negative percent (like −20) for a decrease.
| Percent change | +25% |
| Absolute difference | +20 |
| New value as % of starting value | 125% |
How it works
A percent change compares the size of a change with the value you started from. That comparison to the starting point is the whole idea: a $20 raise means something very different on a $200 paycheck (10%) than on a $2,000 paycheck (1%), and the percent change is what captures the difference.
The calculator follows three steps. It subtracts the starting value from the new value to get the absolute difference. It divides that difference by the starting value to express the change as a fraction of the start. Then it multiplies by 100 to turn the fraction into a percentage. A positive result is labeled an increase and a negative one a decrease, and the third row of the result shows the new value as a percentage of the start — 125% means the new value is one and a quarter times the old one.
The reverse mode answers the other common question: "what will I end up with?" It multiplies the starting value by 1 plus the percent change as a decimal. A 25% increase multiplies by 1.25; a 20% decrease multiplies by 0.80. This is the calculation behind sale prices, raises, and markup: a $80 jacket with a 25% markup is 80 × 1.25 = $100, and the same jacket at 20% off is 80 × 0.80 = $64.
One warning the calculator cannot give but this page should: percent changes do not add. A value that rises 25% and then falls 25% does not return to where it started — 100 rising 25% becomes 125, and 125 falling 25% becomes 93.75. The two percents were measured against different starting values. This asymmetry is why a stock that drops 50% needs a 100% gain just to break even.
Worked example
A winter jacket in a Chicago store was priced at $80 last season and $100 this season. What is the percent increase?
Step 1 — find the difference: 100 − 80 = $20.
Step 2 — divide by the starting value: 20 ÷ 80 = 0.25.
Step 3 — multiply by 100: 0.25 × 100 = 25% increase.
Check it in reverse: $80 increased by 25% is 80 × 1.25 = $100, exactly the new price. Enter 80 and 100 in the calculator above and you get the same result — a 25% increase, a difference of +20, and the new price equal to 125% of the old one. Note that if the jacket later goes on sale back to $80, that is a 20% decrease, not 25% — the base changed.
Common mistakes
Dividing by the new value instead of the starting value. The denominator is always where you started. For $80 → $100, dividing 20 by 100 gives 20%, which is the answer to a different question (the decrease on the way back).
Confusing percent with percentage points. An interest rate moving from 4% to 5% rose by 1 percentage point — and by 25 percent. Both statements are true; they measure different things, and mixing them up badly distorts news about rates, taxes, and poll results.
Assuming equal up-and-down percents cancel. Up 25% then down 25% leaves you 6.25% below the start, because the second percent is taken from a bigger base. Gains and losses only cancel in dollars, not in percents.
Trying to compute a percent change from zero. Going from 0 sales to 50 sales is not an infinite percent increase — it is simply undefined, because you cannot divide by the starting value of 0. Report the absolute change instead.
FAQ
How do you calculate percent increase?
Subtract the starting value from the new value, divide the difference by the starting value, and multiply by 100. For a price that rises from $80 to $100: the difference is $20, and 20 ÷ 80 = 0.25, so the percent increase is 25 percent.
How do you calculate percent decrease?
The same way — the formula gives a negative answer when the value falls, and the size of that answer is the percent decrease. From $100 down to $80: the difference is −$20, and −20 ÷ 100 = −0.20, so the price decreased by 20 percent. This calculator labels the result as an increase or a decrease automatically.
Why is 80 to 100 a 25% increase but 100 to 80 only a 20% decrease?
Because the percentage is always measured against the starting value, and the two trips start from different bases. Going up, the $20 change is measured against $80, and 20 is 25 percent of 80. Coming back down, the same $20 is measured against $100, and 20 is only 20 percent of 100. Percent changes are not reversible at the same rate.
What is the difference between percent and percentage points?
A percentage point is the plain difference between two percentages, while a percent change is relative. If a savings rate rises from 4 percent to 5 percent, that is an increase of 1 percentage point — but a 25 percent increase in the rate itself, because 1 is a quarter of 4. News reports mix these up often; the distinction matters.
Can a percent increase be more than 100 percent?
Yes. A 100 percent increase means the value doubled. Anything beyond that is more than double: a rise from 50 to 150 is a 200 percent increase, because the gain of 100 is twice the starting value of 50. Percent decreases, by contrast, can never exceed 100 percent for a positive quantity — a value cannot fall by more than all of itself.
How do I find the original value before a percent increase?
Divide the final value by 1 plus the percent increase as a decimal. If a bill of $100 is the result of a 25 percent increase, the original was 100 ÷ 1.25 = $80. For a decrease, divide by 1 minus the percent: $80 after a 20 percent decrease came from 80 ÷ 0.80 = $100.