Home › Home & Construction › Paint Cost Calculator

Paint Cost Calculator

Paint is sold by the gallon but rooms are measured in square feet, and the gap between the two is where budgets go wrong — a gallon too few means a second trip mid-job, a gallon too many is money drying out in the can. This free paint cost calculator turns your room measurements, doors, windows and coat count into gallons to buy and a total cost, with primer as a separate line if you need it.

The currency only changes the symbol and formatting — it never converts amounts. Leave a price blank to skip that cost.

2 gallons of paint to buy
Paintable area 348 sq ft · 2 coats · exact need 1.9886 gal · paint cost $70.00
Total wall area384 sq ft
Less doors and windows−36 sq ft
Paintable area348 sq ft
Coverage to apply (all coats)696 sq ft
Paint needed (exact)1.9886 gal
Paint cost$70.00
Total cost$70.00

How it works

The calculator first finds the area that actually gets painted, then multiplies by the number of coats and divides by the coverage printed on the paint can. Wall area for a rectangular room is the perimeter times the ceiling height; doors and windows are subtracted at the standard estimating sizes before any paint math happens.

Wall area = 2 × (length + width) × ceiling height   •   Paintable area = wall area − (21 × doors) − (15 × windows)   •   Gallons = paintable area × coats ÷ coverage per gallon

The door and window allowances — 21 sq ft for a standard interior door and 15 sq ft for an average window — are the figures painters use for quick estimates; measure yours instead if they are unusually large. Coverage defaults to 350 sq ft per gallon, the middle of the range most wall paints claim; the number on your can wins if it differs. The exact gallon figure is then rounded up to whole gallons, because paint is bought in whole cans — and the optional primer line applies one coat over the same paintable area at its own price, so the total separates finish paint from primer honestly.

Worked example

A bedroom 12 ft × 12 ft with an 8 ft ceiling, one door, one window, two coats, mid-range paint at $35 a gallon covering 350 sq ft per gallon.

Step 1 — wall area: 2 × (12 + 12) × 8 = 384 sq ft.
Step 2 — subtract openings: 384 − 21 − 15 = 348 sq ft to paint.
Step 3 — two coats: 348 × 2 = 696 sq ft of coverage.
Step 4 — gallons: 696 ÷ 350 = 1.9886 gallons exactly, so 2 gallons to buy.
Step 5 — cost: 2 × $35 = $70.00.

Enter the same numbers above and the result matches line for line. Tick the primer box with primer at $25 and the same room needs 348 ÷ 350 = 0.994 gallons of primer — one gallon to buy — bringing the total to $95.00.

Getting the estimate right

Two coats is the honest default. One coat rarely hides the old color evenly, especially over patches or a darker shade; pros quote two and so does this calculator unless you choose otherwise.

Measure the ceiling height, do not assume it. Older homes run 9–10 ft and new builds often 9 ft; a foot of extra height on a 12 × 12 room adds 48 sq ft of wall — about a seventh of a gallon per coat.

Rough walls drink paint. Heavy texture, bare plaster and unsealed repairs can drop real coverage toward 300 sq ft per gallon. Edit the coverage field down for those surfaces instead of discovering it mid-wall.

FAQ

How much paint do I need for a 12 × 12 room?

The walls of a 12 × 12 ft room with an 8 ft ceiling total 2 × (12 + 12) × 8 = 384 sq ft. Take away a standard door (21 sq ft) and one window (15 sq ft) and 348 sq ft actually gets painted. Two coats means covering 696 sq ft; at the typical 350 sq ft per gallon that is 1.99 gallons, so buy 2 gallons. At $35 a gallon the paint costs $70.

Why does the calculator subtract doors and windows?

Because you do not paint them, and on a small room they are a real share of the wall: a standard interior door is about 21 sq ft and an average window about 15 sq ft, together roughly 10% of a small bedroom's wall area. Skipping the subtraction overstates the paint by about a fifth of a gallon per coat on a typical room — enough to buy a gallon you never open, or to throw off a tight budget.

Do I really need primer as well as paint?

On bare drywall, fresh plaster, patched areas or a big color change, yes: primer seals the surface so the topcoat covers evenly and does not soak in patchily, and it usually makes two finish coats perform like three. On previously painted walls in good condition and a similar color, a quality paint-and-primer-in-one is often enough. This calculator treats primer as one coat over the same area, priced separately, so you can see exactly what it adds.

How far does a gallon of paint actually go?

Most wall paints are rated at 350–400 sq ft per gallon on smooth, primed drywall, and the can's label states the maker's figure. Rough, porous or heavily textured walls drink more — 300 sq ft per gallon or less — and a dramatic color change can effectively need an extra coat. The coverage field is editable for exactly this reason: use the number printed on the paint you are buying.

Should I buy the exact amount the calculator gives?

Buy the rounded-up figure, not the exact one. Paint is sold in whole gallons and quarts, spills and roller loading waste a little, and you want a labeled leftover can for touch-ups — a wall touched up with a fresh batch of the same color can flash visibly different. The exact figure is shown so you can judge whether a quart top-up makes more sense than another full gallon.

Disclaimer: This is a cost and quantity estimate based on standard door/window allowances and the coverage you enter. Actual coverage varies with surface, texture and paint; check the coverage on your paint can and measure unusual rooms directly.