Home › Home & Construction › Board Feet Calculator
Board Feet Calculator
Lumber yards sell hardwood by the board foot, but a stack of rough boards does not come with the number printed on it — you have to work it out from the dimensions. This free board feet calculator does it from thickness, width, length and board count, and if you add a price per board foot it totals the cost of the stack as well.
How it works
A board foot is a volume of wood: a slab 12 inches long, 12 inches wide and 1 inch thick — 144 cubic inches. Any board's board feet are its own volume measured in those units, so you multiply the three dimensions (with the length in inches) and divide by 144. Boards are counted individually and multiplied at the end, which is why the board count is its own input: ten identical boards hold ten times the board feet of one.
Enter the dimensions the way your yard bills them. For framing lumber that is usually the nominal name — a "2×4" is entered as 2 and 4, even though the dried, planed board in the rack actually measures 1.5 × 3.5 inches. For rough hardwood sold by the board foot, measure the real thickness and width (to the nearest quarter inch is the yard's usual habit) and enter those. The price field is optional and simply multiplies the total board feet; clear it and the tool is a pure measure.
Worked example
You are framing a deck with ten 2×4 boards, each 8 feet long, priced at $8.00 per board foot. Step 1: turn the length into inches — 8 ft × 12 = 96 in. Step 2: one board is 2 × 4 × 96 ÷ 144 = 5.33 board feet. Step 3: ten boards hold 10 × 5.3333 = 53.33 board feet. Step 4: the stack costs 53.3333 × $8.00 = $426.67. Those are this calculator's default inputs, and 53.33 board feet / $426.67 is exactly what it shows. For comparison, a single 1×6 board 12 feet long works out to 1 × 6 × 144 ÷ 144 = exactly 6 board feet — a good sanity check for any lumber math.
Tips for buying by the board foot
Bring your own tape and check a few boards: width varies within a stack of rough lumber, and you pay for what the widest reading says on some yards' tally sticks. Add your cutting waste before you order, not after — 10–15% overage is the usual planning allowance, and boards with knots or checks in the wrong place can push a tight list over. Finally, confirm whether the quoted price is for surfaced (S4S) or rough stock; surfaced boards are thinner than their rough nominal size, and the board-foot tally should use the size before surfacing.
FAQ
How do you calculate board feet?
Multiply thickness (inches) × width (inches) × length (inches), then divide by 144. A 2×4 that is 8 feet long is 2 × 4 × 96 ÷ 144 = 5.33 board feet. If your length is in feet, the shortcut is thickness × width × length in feet ÷ 12.
How many board feet are in a 2×4×8?
5.33 board feet, using the nominal size: 2 in × 4 in × 96 in ÷ 144. Ten of them hold 53.33 board feet. Note the result uses the nominal dimensions you enter — a dressed 2×4 actually measures 1.5 × 3.5 inches, which is 3.5 board feet at 8 feet.
Should I use nominal or actual dimensions?
Use the dimensions your lumber yard bills by — usually the nominal size for softwood framing lumber (a "2×4"), and the actual measured size for rough or hardwood boards sold by the board foot. When in doubt, ask the yard; the difference on a 2×4 is about a third of the volume.
Why do lumber yards add a waste or overage percentage?
Because boards get trimmed, miscut, split and rejected. A 10–15% overage is a common planning allowance for furniture and flooring projects, and this calculator's result is the net figure before any overage you choose to add. It is cheaper to return an unopened board than to stop mid-project for one more run to the yard.
How is board-foot pricing different from per-board pricing?
Per-board pricing charges for the piece regardless of its size. Board-foot pricing charges for the volume of wood, so a thick, wide or long board costs proportionally more. Hardwood dealers almost always price by the board foot; big-box framing lumber is usually priced per piece.
Does the currency selector change the cost?
No. Enter the price per board foot in the currency you selected. The selector only changes the symbol and number formatting of the cost; it never converts amounts between currencies.