Home › Health & Education › Face Shape Finder
Face Shape Finder
Use this free face shape finder to discover your face shape from four simple measurements — no photo needed. Measure your forehead, cheekbones, jawline, and face length with a soft tape, and the finder classifies your face as oval, round, square, heart, oblong, or diamond, explains why, and gives styling notes for your shape.
Measure with a soft tape, straight across, without pressing into the skin. If your hair covers your hairline, push it back first. Measure twice and use the average.
How to measure each part
| Measurement | Where to measure | Tips |
|---|---|---|
| Forehead width | Across the widest part of the forehead, halfway between eyebrows and hairline | Push hair back first |
| Cheekbone width | Across the most prominent point of the cheekbones, below the outer eye corners | Feel for the bone |
| Jawline width | Straight across the widest part of the jaw, below the ears | Or double chin-to-ear |
| Face length | From the center of the hairline straight down to the tip of the chin | Keep the tape vertical |
How it works
Face shape is decided by comparing four numbers: forehead width, cheekbone width, jawline width, and face length. No single number decides it — the pattern of which measurement is widest, and how much longer the face is than it is wide, is what separates one shape from another. This finder compares your numbers with the classic rules used by stylists, and explains which rule matched.
The rules work in order. First, heart: the forehead is the widest measurement and the jaw is clearly the narrowest, under 85 percent of the cheekbone width. Next, diamond: the cheekbones are the widest point while both the forehead and the jaw are under 90 percent of the cheekbone width. Next, oblong: the face is at least 1.45 times as long as it is wide.
Then come round and square, where length and width are close together. If the face length is within half an inch of the cheekbone width and all three widths are within three quarters of an inch of each other, the shape is round or square. The tiebreaker is the jaw: nearly as wide as the cheekbones means square; a little narrower with full cheeks means round. Finally, oval is the fallback: the face is clearly longer than it is wide, the cheekbones are the widest point, and the forehead and jaw taper gently in.
Two things can skew a measurement. A receding or high hairline makes the face length read longer than the bone structure suggests, which can push a round face toward oval or oblong — that is why the tool asks about your hairline. A full beard adds width to the jaw and can make an oval face read as square. Measure the skin, not the hair.
Remember that face shape is a guide for styling, not a verdict on how you look. Most real faces sit between two shapes, and the styling advice for the two nearest shapes usually overlaps. Use the result to narrow down haircuts, beard styles, and glasses, then trust the mirror over the label.
Worked example
A person measures a forehead of 5.5 inches, cheekbones of 6 inches, a jawline of 5 inches, and a face length of 7.5 inches.
Step 1: Compare the widths — the cheekbones (6 in) are the widest, ahead of the forehead (5.5 in) and the jaw (5 in).
Step 2: Check heart — the forehead is not the widest, so it is not heart.
Step 3: Check diamond — the forehead is 92% of the cheekbone width, above the 90% cut-off, so it is not diamond.
Step 4: Check oblong — the length is 7.5 ÷ 6 = 1.25 times the width, below the 1.45 cut-off, so it is not oblong.
Step 5: Check round and square — the length is 1.5 inches more than the width, far above the half-inch limit, so it is neither.
Step 6: Fall back to oval — the face is clearly longer than wide, the cheekbones are widest, and the forehead and jaw taper gently.
The result is oval. Most haircuts work, so pick by hair texture and taste; side parts and soft layers suit the balance, and almost any glasses frame works.
Styling notes by shape
| Shape | Hair | Beard | Glasses |
|---|---|---|---|
| Oval | Almost any cut; side parts suit best | Most styles work | Almost any frame |
| Round | Height on top, short sides | Boxed beard or goatee adds length | Angular, rectangular frames |
| Square | Soft layers and texture | Softer, rounded beard | Round or oval frames |
| Heart | Volume at sides and chin | Fuller beard | Bottom-heavy or rimless frames |
| Oblong | Shorter on top, volume at sides | Fuller beard shortens the face | Tall, deep frames |
| Diamond | Volume at forehead and chin | Short beard adds jaw width | Oval or rimless frames |
FAQ
How do I measure my face for the face shape finder?
Use a soft tape measure and a mirror. Forehead width: across the widest part of your forehead, about halfway between your eyebrows and your hairline. Cheekbone width: across the most prominent point of your cheekbones, usually just below the outer corners of your eyes. Jawline width: from the tip of your chin to just below your ear, then double it, or measure straight across the widest part of the jaw. Face length: from the center of your hairline straight down to the tip of your chin.
What is the most common face shape?
Oval is the most commonly cited face shape, and it is also the shape that suits the widest range of hairstyles and glasses, because its proportions are balanced: the face is longer than it is wide, the cheekbones are the widest point, and the forehead and jaw are slightly narrower. Round, square, heart, oblong, and diamond shapes are all common too, and none of them is better or worse than the others.
Can my face shape change over time?
Yes, slowly. Weight gain or loss changes the fullness of the cheeks and jaw, age changes skin and muscle tone along the jawline, and hairstyles and facial hair change how wide or long the face looks. The underlying bone structure stays the same, so re-measuring after a big change in weight is worth doing, but a small change of a quarter inch will not usually change your shape.
Is this face shape finder as accurate as a photo analysis?
Measurements are often more reliable than a photo, because a photo can distort proportions with lens angle, lighting, and head tilt. A tape measure gives you four real numbers to compare, which is exactly what this finder uses. The result is still a guide rather than a diagnosis: faces sit on a spectrum, and many people fall between two shapes.
What glasses suit my face shape?
The usual rule is to pick frames that contrast with your shape: round faces suit angular, rectangular frames; square faces suit round or oval frames that soften the jaw; oval faces suit almost any frame; heart-shaped faces suit frames that are wider at the bottom; oblong faces suit tall frames that shorten the look of the face; diamond faces suit oval or rimless frames that do not add width at the cheekbones.