Home › Converters › Watts to HP Converter

Watts to HP Converter

The motor nameplate, straight from the factory, reads 745.7 watts — but the shelf tag, the review and your old tool all talk horsepower. This watts to HP converter translates instantly with the exact factor, and also converts kilowatts, metric horsepower (PS) and BTU per hour in either direction.

Watts to HP conversion table

Motor, tool and appliance ratings that appear in watts on the nameplate, with their horsepower equivalents. The converter above also handles kilowatts, metric horsepower (PS) and BTU per hour — pick any two units in the From and To boxes.

Watts (W)Horsepower (hp)Kilowatts (kW)
100 W0.134 hp0.1 kW
250 W0.335 hp0.25 kW
500 W0.671 hp0.5 kW
745.7 W1 hp0.746 kW
1,000 W1.341 hp1 kW
1,500 W2.012 hp1.5 kW
2,000 W2.682 hp2 kW
3,000 W4.023 hp3 kW
5,000 W6.705 hp5 kW
7,457 W10 hp7.457 kW
10,000 W13.41 hp10 kW

How it works

The watt is the standard international unit of power — one joule of energy per second — and it is the unit on every motor nameplate, appliance label and solar panel spec. Horsepower is the older unit James Watt coined to sell steam engines: one horsepower is 550 foot-pounds of work per second, which in metric terms is exactly 745.699872 watts. Converting watts to horsepower is therefore a single division by that number; there is no approximation in the factor itself.

Watts to HP: hp = watts ÷ 745.699872  |  HP to watts: watts = hp × 745.699872  |  Quick estimate: divide watts by 746 (or multiply kW by 1.341)

The Amount box takes the wattage, the From list sets its unit and the To list sets the unit you want — watts and horsepower are pre-selected — and the result updates as you type. The Swap units button reverses the conversion. Kilowatts, metric horsepower (PS) and BTU per hour are in the lists too: kilowatts for anything over a few thousand watts, PS for European ratings (735.49875 W each — slightly smaller than hp), and BTU per hour for furnaces and air conditioners.

The conversion matters because the two units guard different shelves. Electric motors, pumps, compressors and power tools are sold in watts or kilowatts almost everywhere outside US marketing, while American buyers comparison-shop in horsepower — a 2 hp pool pump, a 5 hp shop compressor. Being able to move a nameplate wattage into horsepower on the spot turns a foreign spec sheet into a direct comparison.

Worked example

A workshop owner in Georgia is replacing a bench grinder. The new tool's nameplate is in watts — 745.7 W — and he wants to know how it stacks up against his old 1 hp model.

Step 1: Write down the wattage — 745.7 W.
Step 2: Divide by the exact factor: 745.7 ÷ 745.699872 = 1.0000002.
Step 3: Round to three decimals — 1 hp.
Step 4: Conclude — the new grinder matches the old one, horsepower for horsepower.

The converter shows exactly 1 horsepower for 745.7 W. The same arithmetic scales up: his 1,500 W heater puts out the power equivalent of 2.01 hp, and a 10,000 W whole-house generator works out to 13.41 hp — figures the table above confirms.

Common mistakes and tips

The most common slip is a misplaced factor of 1,000: converting kilowatts as if they were watts turns a 5 kW motor into a feeble 0.007 hp instead of 6.71 hp. Check the unit on the nameplate before typing. The second trap is using the PS factor by accident — dividing by 735.5 instead of 745.7 inflates the horsepower by about 1.4 percent, enough to mislead a close comparison between a European and an American rating.

For mental math, 746 is the friendlier divisor: watts ÷ 746 gives horsepower accurately enough for shopping decisions, and multiplying kW by 1.341 does the same job in one step. One last caution: for electric motors, nameplate watts are sometimes the power drawn rather than the power delivered at the shaft, so a converted figure is a rating comparison, not a dyno measurement.

FAQ

How many watts is 1 hp?

1 hp is exactly 745.699872 watts — usually rounded to 745.7 W, or 746 W for mental math. The figure comes from James Watt's definition of a horsepower as 550 foot-pounds per second, restated in metric units.

How many hp is 1,000 watts?

1,000 watts is 1.341 hp: 1,000 ÷ 745.699872 = 1.341022. A 1 kW motor is therefore a little over one and a third horsepower, which is why American versions of the same tool are often sold as 1.3 hp models.

How many hp is a 1,500 watt heater?

In raw power terms, 1,500 watts is equivalent to about 2.01 hp (1,500 ÷ 745.699872 = 2.0115). That is an equivalence of power output, not a claim that the heater does mechanical work — hp here is just another ruler for the same 1,500 watts.

What is the formula to convert watts to hp?

hp = watts ÷ 745.699872. To work in kilowatts instead, divide watts by 1,000 first, then by 0.745699872. For a quick estimate, dividing watts by 746 is accurate to a small fraction of a percent.

Is 1 PS the same number of watts as 1 hp?

No. The metric horsepower (PS) used in Europe is 735.49875 watts, about 1.4 percent less than the mechanical horsepower of 745.699872 watts. A 100 PS engine is 73.55 kW; a 100 hp engine is 74.57 kW. The converter above lists PS separately so the two are never blended.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.