Home › Converters › Short Tons to Metric Tons

Short Tons to Metric Tons

A scale ticket, a freight quote or a gravel order gives you a weight in short tons, but the buyer, the ship or the spec sheet works in metric tons — and the two differ by almost ten percent, far too much to wave through. This short tons to metric tons converter translates between them exactly, keeps the long ton separate and labelled, and also converts kilograms, grams, pounds, ounces and stones, with a full breakdown of every equivalent.

4.53592 metric tons
5 short tons × 0.90718474 = 4.53592 metric tons  •  4,535.9237 kilograms

Short tons to metric tons conversion table

Short tonsMetric tonsKilogramsPounds
10.90718907.184742,000
21.814371,814.369484,000
54.535924,535.923710,000
109.071859,071.847420,000
2018.1436918,143.694840,000
2522.6796222,679.618550,000
4036.2873936,287.389680,000
5045.3592445,359.237100,000
10090.7184790,718.474200,000

How it works

Three different "tons" are still in daily use, and they are not interchangeable. The short ton is the American ton: exactly 2,000 pounds. The metric ton, spelled tonne in most of the world, is exactly 1,000 kilograms. The long ton is the older British ton of 2,240 pounds. Because a pound is defined as exactly 0.45359237 kilograms, a short ton is 2,000 × 0.45359237 = 907.18474 kg — which is 0.90718474 metric tons. That single factor is the whole conversion, and every unit on this page runs through kilograms under the hood so the three tons can never contradict each other.

Metric tons = short tons × 0.90718474  |  Short tons = metric tons × 1.10231131  |  1 short ton = 2,000 lb = 907.18474 kg · 1 metric ton = 1,000 kg = 2,204.62262 lb · 1 long ton = 2,240 lb = 1.0160469088 t

The gap matters in money: a metric ton is about 204.6 pounds — over ten percent — heavier than a short ton. Ordering "25 tons" of aggregate across the two systems shifts the delivery by more than two metric tons of stone, which is why freight contracts spell out which ton they mean and why this converter keeps all three labelled on screen at once in the breakdown.

Worked example

A landscaping crew in Colorado orders 5 short tons of decorative rock from the local quarry, but the loader's onboard scale reports in metric tons and the driver wants to check the load before leaving the yard.

Step 1: Write down the ordered weight — 5 short tons.
Step 2: Use the factor — 1 short ton = 0.90718474 metric tons.
Step 3: Multiply: 5 × 0.90718474 = 4.5359237.
Step 4: Read the result — 4.53592 metric tons.

The converter shows exactly 4.53592 metric tons, and the breakdown adds 4,535.9237 kilograms and 4.46429 long tons. If the loader reads about 4.54 t, the truck is carrying what was ordered; a reading near 5.00 t would mean the yard loaded metric tons against a short-ton order — nearly a tenth too much rock, and an overweight ticket waiting down the road.

Common mistakes and tips

The costliest mistake is treating "ton" as one unit. On any document that crosses a border — or even just a company border — confirm whether the figure is short, long or metric before signing; the words "net ton" and "gross ton" in older US documents mean short and long tons respectively. The second slip is spelling: "tonne" always means the metric 1,000 kg, while "ton" alone is ambiguous — quote the tonne spelling in writing when you mean metric. Finally, keep the anchor in mind for quick estimates: metric tons are the short-ton figure minus roughly a tenth, and short tons are the metric figure plus roughly a tenth — good enough to spot a gross error at a glance, with this converter for the exact number.

FAQ

How many metric tons are in a short ton?

One short ton is 0.90718474 metric tons. A short ton is 2,000 pounds and a metric ton is 1,000 kilograms; since a pound is 0.45359237 kg, 2,000 lb is 907.18474 kg, which is 0.90718474 t.

What is the difference between a short ton and a metric ton?

A short ton is the US ton of 2,000 pounds (907.18474 kg). A metric ton — the tonne — is 1,000 kilograms (2,204.62262 lb). The metric ton is about 204.6 lb heavier, roughly 10 percent more than the short ton.

What is a long ton in metric tons?

A long ton, the older imperial ton of 2,240 pounds, is 1.0160469088 metric tons — the only one of the three tons that is heavier than a metric ton. It still appears in some shipping and naval contexts.

How do I convert metric tons back to short tons?

Divide the metric tons by 0.90718474, or multiply by 1.10231131. Ten metric tons is 10 × 1.10231131 = 11.02311 short tons. The Swap button on this converter reverses the units in one click.

Which ton do US truck scales and freight bills use?

Short tons. US highway scales, gravel yards, scrap dealers and freight paperwork weigh in pounds and short tons of 2,000 lb. Metric tons show up when the cargo is traded internationally or the equipment is rated in kilograms.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.