Home › Converters › Rankine to Celsius

Rankine to Celsius

Rankine shows up in US engineering handbooks, thermodynamics textbooks and older industrial documentation, while almost everyone else works in Celsius. This Rankine to Celsius converter translates between them with the exact formula, and shows the Fahrenheit and Kelvin readings alongside so any temperature from a US source can be placed on every scale at once. All four scales are on both menus, so the same tool runs from Celsius back to Rankine, or any other pair.

Rankine is the Fahrenheit-sized absolute scale: 0 °R is absolute zero and water freezes at 491.67 °R. It appears in US engineering and thermodynamics work.

100.00 °C
671.67 °R = 100.00 °C · Celsius: 100.00 °C · Fahrenheit: 212.00 °F · Kelvin: 373.15 K · Rankine: 671.67 °R

Rankine reference temperatures

Landmark temperatures on all four scales. Notice that Rankine and Kelvin both start at absolute zero, while Celsius and Fahrenheit place their zeros at everyday reference points.

Rankine (°R)Celsius (°C)Fahrenheit (°F)Kelvin (K)What it is
0−273.15−459.670Absolute zero
491.67032273.15Water freezes
509.671050283.15A cool day
527.672068293.15Room temperature
671.67100212373.15Water boils
1000282.41540.33555.56A hot oven, roughly

How it works

Rankine is the absolute companion to Fahrenheit, in the same way Kelvin is the absolute companion to Celsius. Its degrees are the same size as Fahrenheit degrees, but its zero is absolute zero — the coldest possible temperature — rather than a brine mixture in an 18th-century workshop. That design makes Rankine handy in thermodynamics, where ratios of temperatures only make sense on a scale that starts at true zero.

Celsius = (°R − 491.67) × 5 ÷ 9  |  the reverse: °R = (°C + 273.15) × 9 ÷ 5  |  water freezes at 491.67 °R and boils at 671.67 °R

The number 491.67 is the bridge between the scales: it is the Rankine reading at the freezing point of water, where Celsius reads 0. Subtracting it lines the two zeros up; multiplying by 5/9 then rescales the big Fahrenheit-sized degrees into Celsius-sized ones, since 180 Fahrenheit degrees span the same interval as 100 Celsius degrees between freezing and boiling. This converter runs every pair through Celsius internally, so conversions between Fahrenheit, Kelvin and Rankine on the menus stay consistent with the headline formula. Try entering 0 in Rankine: the result, −273.15 °C, is absolute zero itself — nothing can be colder, and the tool will stop you if you try to go below it on any scale.

Worked example

An engineering student in Michigan is working through a thermodynamics problem set that gives a steam temperature as 671.67 °R, and needs it in Celsius.

Step 1: Subtract the freezing-point offset — 671.67 − 491.67 = 180.
Step 2: Rescale the degrees — 180 × 5 ÷ 9 = 100.
Step 3: The steam temperature is 100 °C.

The converter confirms it: 671.67 °R = 100.00 °C — the boiling point of water, which makes sense as a textbook steam figure. The result line also shows 212.00 °F and 373.15 K, the same temperature on the other two scales.

Common mistakes and tips

The frequent error is forgetting the offset and simply multiplying Rankine by 5/9. That rescaling alone converts Rankine to Kelvin, not Celsius — 671.67 × 5/9 = 373.15, which is the Kelvin answer. If your Celsius result looks about 273 too high, the subtraction step was skipped. The reverse trip catches people too: going from Celsius to Rankine, the 273.15 must be added before multiplying by 9/5, not after.

A useful memory hook: Rankine and Kelvin are cousins. Both start at absolute zero, so converting between them is a pure rescale with no offset — multiply Kelvin by 9/5 to get Rankine. And because Rankine degrees are Fahrenheit-sized, everyday US reference points carry over with just the offset added: room temperature of 68 °F is 527.67 °R, as the table above shows.

FAQ

How do I convert Rankine to Celsius?

Subtract 491.67, then multiply by 5 ÷ 9: Celsius = (°R − 491.67) × 5 ÷ 9. For example, 671.67 °R gives (671.67 − 491.67) × 5 ÷ 9 = 100 °C, the boiling point of water.

What is 0 Rankine in Celsius?

0 °R is −273.15 °C — absolute zero, the coldest temperature that exists. The Rankine and Kelvin scales both start there, which is why their readings are always proportional: °R = K × 9 ÷ 5.

Why does the formula subtract 491.67?

Because 491.67 °R is where water freezes, and that is the point where Celsius reads 0. Subtracting 491.67 aligns the two scales at freezing; multiplying by 5 ÷ 9 then converts the smaller Fahrenheit-sized degrees into Celsius-sized degrees.

Who uses the Rankine scale?

Mostly US engineers. Rankine appears in thermodynamics, aerospace and some industrial and HVAC work in the United States, because it pairs Fahrenheit-sized degrees with an absolute zero starting point, which temperature-ratio calculations require. Everyday weather and science almost everywhere else use Fahrenheit or Celsius.

Can I convert Celsius back to Rankine here?

Yes. Set the From menu to Celsius and the To menu to Rankine, or use the swap button. The reverse formula is °R = (°C + 273.15) × 9 ÷ 5, so 100 °C becomes 671.67 °R.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.