Home › Converters › Px to Pt

Px to Pt

A print designer hands you a spec in points, but your stylesheet works in pixels — or the other way around. This px to pt converter translates between the two instantly, and also covers the rest of the typography toolkit: em, rem, percent, picas, inches, centimeters and millimeters, all tied together by one adjustable base font size. Change the base and every relative unit updates, so you can match the exact root size of your project.

12 pt
16 px = 12 pt · 1 pt = 1.333333 px · Base font size: 16 px

Points to pixels table

The classic print sizes converted at the CSS standard of 96 pixels per inch. These are absolute conversions — they do not depend on the base font size.

PointsPixels
6 pt8 px
7 pt9.33 px
8 pt10.67 px
9 pt12 px
10 pt13.33 px
11 pt14.67 px
12 pt16 px
14 pt18.67 px
16 pt21.33 px
18 pt24 px
24 pt32 px
36 pt48 px
48 pt64 px
72 pt96 px

How it works

Points come from print: one point is exactly 1/72 of an inch, a unit typesetters have used for centuries. Pixels come from screens, and CSS pins the two together by defining one inch as exactly 96 pixels. That single definition drives every absolute conversion on this page:

pt = px × 72 ÷ 96 = px × 0.75  |  px = pt × 96 ÷ 72 = pt × 1.3333  |  1 inch = 96 px = 72 pt = 6 pc  |  em, rem and % scale with the base font size: 1 em = 1 rem = 100% = base size in px

Absolute units — px, pt, picas, inches, centimeters, millimeters — convert through the pixel using the factors above, so 12 pt is 16 px no matter what project you are in. Relative units are different: an em or rem is only meaningful against a base font size, which browsers default to 16 px. If your design system sets the root to 10 px (a common trick that makes 1 rem = 10 px), set the base size here to 10 and the em, rem and percent results follow your project instead of the browser default.

Every conversion runs through the pixel as a hub: the amount is first turned into pixels with its own unit's factor, then out into the target unit. That keeps all nine units consistent with each other, so converting px to pt to inches to px brings you back to exactly where you started.

Worked example

A developer in Portland is rebuilding a print brochure in HTML. The brochure's body text is specified as 12 pt, and the stylesheet needs pixels.

Step 1: Apply the px formula — px = pt × 96 ÷ 72.
Step 2: 12 × 96 ÷ 72 = 12 × 1.3333 = 16.
Step 3: The body text becomes font-size: 16px.

The converter shows exactly that: 12 pt = 16 px. The same swap works in reverse for a web mockup going to print — a 24 px headline is 18 pt — and with the base set to 16, that 16 px body text is also 1 em, 1 rem and 100%, which the unit menus show side by side.

Common mistakes and tips

The most common mistake is assuming points and pixels are close enough to swap one-for-one. They are not: a point is a third larger than a pixel, so setting 12 px where the spec said 12 pt shrinks the text by 25% — noticeable in print, subtle enough on screen to slip through review. The second trap is forgetting that pt in CSS is an absolute unit anchored to 96 px per inch, while the same 12 pt printed on paper is measured against a physical inch; the two agree by definition in CSS, but a screenshot measured with an on-screen ruler will not match a printed page unless the display scaling is exactly 100%.

For relative units, the tip is to keep one base size per project and write it down. Mixed bases are the usual reason em values "look wrong": an em inside a component with a 14 px font size is 14 px, not the 16 px root you converted with. This converter makes the base an explicit input for exactly that reason — change it once and every relative result follows.

FAQ

How many pixels are in a point?

One point is 1.3333 pixels at the CSS standard of 96 pixels per inch, because a point is 1/72 of an inch: 96 ÷ 72 = 1.3333. So 12 pt is 16 px, 18 pt is 24 px and 72 pt is exactly 96 px.

How many points are in a pixel?

One pixel is 0.75 points: a pixel is 1/96 of an inch and a point is 1/72 of an inch, so px × 72 ÷ 96 = px × 0.75. That makes 16 px equal to 12 pt and 100 px equal to 75 pt.

What base size should I use for em and rem?

Use the root font size of your project. Browsers default to 16 px, and most design systems keep that default, but some set the root to 10 px or 14 px to make mental math easier. If you did not set it yourself, 16 px is almost certainly the right base.

Is a point the same size in print and in CSS?

Yes, by definition. CSS fixes the inch at 96 px and the point at 1/72 inch, so a CSS point is the same physical size as a print point. What can differ is your screen: display scaling above or below 100% makes on-screen measurements look bigger or smaller, even though the CSS values are exact.

What is a pica?

A pica is a traditional print unit equal to 12 points, which makes it exactly 1/6 of an inch or 16 px. Column widths in newspapers and books were historically set in picas, and some print design tools still offer it, which is why it is on the unit menus here.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.