Home › Converters › Nautical Miles to Miles

Nautical Miles to Miles

Charts, flight plans and sailing routes are drawn in nautical miles, but your car, your map app and every US road sign think in ordinary miles. This nautical miles to miles converter translates between the sea-and-sky unit and the road unit: enter the nautical miles and get statute miles, at the exact rate of 1.15077945 miles per nautical mile. It converts back too, and the unit boxes cover kilometers, meters, feet and yards as well.

Nautical miles to miles table

Sea and air distances in nautical miles with their statute-mile equivalents, at 1 nautical mile = 1.15077945 miles. A knot is one nautical mile per hour, so these distances are also hours of travel at 1 knot.

Nautical miles (nmi)Miles (mi)
1 nmi1.151 mi
5 nmi5.754 mi
10 nmi11.508 mi
25 nmi28.769 mi
50 nmi57.539 mi
100 nmi115.078 mi
200 nmi230.156 mi
500 nmi575.39 mi
1,000 nmi1,150.779 mi
2,500 nmi2,876.949 mi
5,000 nmi5,753.897 mi

How it works

The nautical mile exists because it is tied to the shape of the Earth itself: one nautical mile is one minute of latitude — one sixtieth of a degree — along a meridian. That makes it the natural unit for navigation, because a distance read off a chart in latitude minutes is a distance in nautical miles, with no conversion at all. Pilots and sailors therefore plan in nautical miles and knots, while everyone on land uses the statute mile of 5,280 feet.

Both units are now fixed by exact definitions. The international nautical mile is exactly 1,852 meters, and the statute mile is exactly 1,609.344 meters. Dividing 1,852 by 1,609.344 gives the rate on this page: 1 nautical mile = 1.15077945 statute miles.

Nautical miles to miles: miles = nmi × 1.15077945  |  Miles to nautical miles: nmi = miles ÷ 1.15077945  |  Built from exact definitions: 1 nmi = 1,852 m and 1 mile = 1,609.344 m

To convert nautical miles to statute miles, multiply by 1.15077945 — a nautical mile is about 15% longer than a statute mile, so the mile figure always comes out larger. For a cockpit-quick estimate, add a sixth: 60 nautical miles is roughly 69 miles against the exact 69.047. To convert back, divide the miles by 1.15077945: a 100-mile leg of a journey is 100 ÷ 1.15077945 = 86.898 nautical miles. The other units in the boxes convert through meters, so chart distances can also be read in kilometers (1 nmi = 1.852 km exactly) without extra steps.

Worked example

Captain Lee is bringing a ferry from an offshore island back to the mainland terminal. The charted route is 120 nautical miles, and a passenger asks how far that is in the miles they are used to from driving.

Step 1: Write down the charted distance — 120 nautical miles.
Step 2: Use the conversion factor — 1 nautical mile = 1.15077945 miles.
Step 3: Multiply: 120 × 1.15077945 = 138.093534.
Step 4: Round to three decimals — 138.094 miles.

That is exactly what the converter shows for 120 nautical miles: 138.094 miles — roughly the drive from New York to New Haven, done on the water. At the ferry’s 20-knot cruise, those 120 nautical miles take 120 ÷ 20 = 6 hours.

Common mistakes and tips

The biggest mistake is treating nautical miles and statute miles as the same unit on a fuel or time calculation. A boat that burns fuel by the hour and travels at 15 knots covers 15 nautical miles — 17.3 statute miles — per hour. Planning a 100-mile trip as if miles were nautical underestimates the distance by 15 miles, which at sea is not a rounding error, it is a missed harbor.

Remember also that a knot is a speed, not a distance: 1 knot = 1 nautical mile per hour = 1.15077945 mph. Flight trackers and weather reports mix knots, mph and km/h freely, so check the unit before comparing numbers. On this page, "miles" always means statute miles, the kind on US road signs.

FAQ

How many miles are in a nautical mile?

One nautical mile is 1.15077945 statute miles. The nautical mile is exactly 1,852 meters and the statute mile is exactly 1,609.344 meters, and 1,852 ÷ 1,609.344 = 1.15077945.

Why is a nautical mile longer than a mile?

Because it is based on the Earth, not on feet. One nautical mile is one minute of latitude — 1/60 of a degree of the planet’s circumference — which works out to 1,852 meters, about 15% longer than the 1,609.344-meter statute mile.

How do I convert miles back to nautical miles?

Divide the statute miles by 1.15077945. For example, 500 miles ÷ 1.15077945 = 434.488 nautical miles.

How many nautical miles is a flight from New York to Los Angeles?

The great-circle distance is about 2,140 nautical miles, which converts to roughly 2,463 statute miles (2,140 × 1.15077945). Airlines plan the route in nautical miles and knots even over land.

What is a knot in miles per hour?

One knot is one nautical mile per hour, which is 1.15077945 mph. A ship making 20 knots is traveling at about 23.02 mph.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.