Home › Converters › GB to TB Converter

GB to TB Converter

The NAS, the backup report and the drive listing all size the same storage three different ways — some in GB, some in TB, and your operating system quietly using a fourth measure. This free GB to TB converter ends the argument instantly, in decimal units (1 TB = 1,000 GB, the way drives are sold) and binary units (1 TiB = 1,024 GiB, the way Windows counts). Bits, bytes, KB and MB are covered too.

The result also shows the same data in the other system, underneath.

GB to TB conversion table

Drive-array and backup sizes that are usually quoted in both units, shown in decimal and binary. The binary column is the same amount of data the way Windows and NAS dashboards report it.

Gigabytes (GB)Terabytes (TB, decimal)Tebibytes (TiB, binary)

How it works

Terabytes are where home storage now lives: backup drives, NAS boxes and game libraries are all sized in TB, while the files and folders filling them are still measured in GB. The step between the two has two definitions. In the decimal system used by drive manufacturers and cloud pricing pages, each step up the ladder multiplies by exactly 1,000, so 1 TB is 1,000 GB. In the binary system used by operating systems, each step multiplies by 1,024 — a power of two — so 1 TiB is 1,024 GiB. Both systems write the same letters, which is why the same hardware shows two different capacities.

GB to TB (decimal): TB = GB ÷ 1,000  |  TB to GB: GB = TB × 1,000  |  Any pair: result = amount × (bits per from-unit) ÷ (bits per to-unit)  |  Binary uses 1,024 per step instead of 1,000

Enter the amount, pick GB in the From box and TB in the To box, and choose the unit system that matches where your number came from. The big result is in your chosen system; the line underneath shows the same quantity of data in the other system, so a decimal drive capacity can be compared directly with a binary free-space report. The swap button reverses the direction, and bits, bytes, KB and MB sit in the lists for smaller quantities.

At terabyte scale the two systems are far apart — about 10 percent — so choosing wrongly is no longer a rounding error. A video archive of 8,000 GB is 8 TB to the drive maker but only about 7.28 TiB to the operating system, a gap of more than 700 GB. This converter always displays both, which removes the guesswork when you are matching a backup set against a new drive.

Worked example

A home NAS in a Texas household has four 2 TB drives, and its owner, Priya, is checking a backup report that totals the protected data in GB: 6,400 GB. She wants to know whether a single 8 TB external drive can hold a full copy as an off-site backup.

Step 1: Pick the decimal system — both figures come from drive packaging and the backup tool's decimal report.
Step 2: Divide the GB figure by the step: 6,400 ÷ 1,000 = 6.4.
Step 3: Read the result — the backup set is 6.4 TB.
Step 4: Compare — 6.4 TB fits on the 8 TB drive with room to spare.

That is what the converter shows for 6,400 GB: 6.4 TB in decimal units, and about 5.82 TiB in binary units underneath — the number her NAS dashboard will quote for the same data once the copy finishes.

Common mistakes

The most common mistake at this size is treating the decimal and binary figures as interchangeable. On a single drive the difference between 8 TB and 8 TiB is about 796 GB of real capacity — enough to swallow a whole backup set — so check which system a quote uses before you buy or copy. The second trap is RAID arithmetic: a NAS advertising 8 TB of drives in a mirrored array only offers about half of that in usable space, before any unit conversion happens. Convert the usable figure, not the sticker total.

Also watch the bits-versus-bytes trap in network speeds: a byte is 8 bits, and backup times are set by bits. Copying 1 TB over a 1 Gb/s link takes at least 8,000 seconds — over two hours — even with perfect throughput, a number that surprises people who expected the two "tera/giga" figures to cancel out.

FAQ

How many GB are in a TB?

In the decimal system used by storage manufacturers, 1 TB is exactly 1,000 GB. In the binary system used by operating systems, 1 TiB is 1,024 GiB. This converter shows both, so you can match whichever system your number came from.

How many TB is 8,000 GB?

8,000 GB is 8 TB in decimal units (8,000 ÷ 1,000). The same data measured in binary units is about 7.28 TiB, because a tebibyte is larger than a terabyte — the gap grows to roughly 10 percent at this size.

Is 1 TB 1,000 GB or 1,024 GB?

Both conventions exist. Drive makers use decimal: 1 TB = 1,000 GB, following the metric meaning of tera. Windows uses binary but labels it with decimal names: 1 TiB = 1,024 GiB, displayed as TB. That is why a new drive always shows less capacity in Windows than its box promises.

How many GB is 1.5 TB?

1.5 TB is 1,500 GB in decimal units (1.5 × 1,000). Half a terabyte drive or partition is 500 GB by the same arithmetic, and a quarter is 250 GB.

Why does my 8 TB NAS show about 7.3 TB of space?

Your NAS drives hold 8 trillion bytes, sold as 8 TB decimal. Windows and most NAS dashboards divide those bytes by 1,099,511,627,776 (one TiB) instead of 1,000,000,000,000, so they report about 7.28 and usually call it TB. No space is lost; only the measuring unit changed.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.