Home › Converters › Ft/s to Mph

Ft/s to Mph

A ballistics table, a physics problem or a wind report hands you a speed in feet per second, but the number means nothing until you see it as the miles per hour your speedometer speaks. This ft/s to mph converter bridges the two instantly with the exact 15/22 factor, works in both directions, and also converts kilometers per hour, meters per second and knots, with a full breakdown of every equivalent on screen.

60 miles per hour
88 feet per second × 0.68181818 = 60 miles per hour  •  26.8224 meters per second
Miles per hour60 miles per hour
Kilometers per hour96.56064 kilometers per hour
Meters per second26.8224 meters per second
Feet per second88 feet per second
Knots52.13857 knots

Ft/s to mph conversion table

Feet per secondMiles per hourMeters per second
10.681820.3048
53.409091.524
106.818183.048
1510.227274.572
2013.636366.096
2517.045457.62
3020.454559.144
4027.2727312.192
443013.4112
5034.0909115.24
6040.9090918.288
886026.8224
10068.1818230.48
12081.8181836.576

How it works

Feet per second is the working speed unit of American physics classes, ballistics tables, wind-tunnel reports and elevator specs: it says how many feet something crosses in one second. Miles per hour is the road unit — what speedometers show and speed limits are posted in. The Speed box takes any speed you type, the From list sets the unit you are starting with, and the To list sets the unit you want — ft/s and mph are pre-selected, and the result updates as you type.

Everything on this page converts through miles per hour, so any pair of units in the two lists works: knots to feet per second for boating, meters per second to mph for weather reports and science work, and every other combination. The breakdown under the result shows the same speed in all five units at once, and the Swap units button flips the two lists and converts back the other way.

Miles per hour = feet per second × 15/22 (0.681818)  |  Feet per second = miles per hour × 22/15 (1.466667)  |  88 ft/s = 60 mph exactly
The factor is a clean fraction, not a measurement. One mile is 5,280 feet and one hour is 3,600 seconds, so one mph is 5,280 ÷ 3,600 = 22/15 ft/s — and going the other way, one ft/s is 15/22 mph. That is why the anchor is so tidy: 88 ft/s × 15/22 = exactly 60 mph. A quick mental check: the mph figure should always be about two-thirds of the ft/s figure, so if your answer came out bigger than your input, the direction got flipped.

Worked example

A high-school physics class in Ohio drops a ball from a roof and calculates it was moving at 88 ft/s just before it hit the ground, and the teacher asks for that in miles per hour.

Step 1: Write down the speed in ft/s — 88 ft/s.
Step 2: Use the exact factor — 1 ft/s = 15/22 mph.
Step 3: Multiply: 88 × 15 ÷ 22 = 60.
Step 4: Read the result — 60 miles per hour.

Type 88 ft/s into the converter and it shows exactly that: 60 miles per hour — falling-object speed that would earn a serious speeding ticket. The reverse works the same way: a 30 mph school-zone limit is 30 × 22/15 = 44 ft/s.

Common mistakes and rounding

The most common mistake is reaching for the meters-per-second factor instead: ft/s to m/s uses 0.3048, which is a different conversion entirely, and answers built on it are wrong by more than half. The second trap is the rough shortcut "just take two-thirds" being applied backwards — multiplying mph by 2/3 to get ft/s when you should multiply by 22/15 (about 1.47). Keep the anchor in mind: 88 ft/s and 60 mph are the same speed, so the ft/s number is always the bigger of the two.

For everyday intuition, whole numbers are plenty: a person walks at about 4.4 ft/s (3 mph) and sprints near 33 ft/s (22.5 mph). The converter keeps five decimals because ballistics and engineering work need them — at 2,800 ft/s, a typical rifle muzzle velocity, the mph answer is 1,909.09091, and the decimals are part of the spec.

FAQ

How many mph is 88 ft/s?

88 ft/s is exactly 60 mph. Multiply the feet per second by 15/22: 88 x 15 / 22 = 60. It is the cleanest anchor in this conversion — a 60 mph car covers 88 feet every second.

How do I convert ft/s to mph?

Multiply the feet per second by 0.681818 (the fraction 15/22). For example, 50 ft/s x 0.681818 = 34.09091 mph, and 100 ft/s x 0.681818 = 68.18182 mph.

How many ft/s is 60 mph?

60 mph is 88 ft/s. Multiply the mph by 22/15 (1.466667): 60 x 1.466667 = 88. That is why a car at highway speed crosses a 264-foot football-field-length gap in about three seconds.

How many ft/s is 100 mph?

100 mph is 146.66667 ft/s. The math is 100 x 22 / 15 = 146.66667 — the release speed of a 100 mph fastball, before air resistance slows it on the way to the plate.

Why do physics and ballistics use ft/s instead of mph?

Because the rest of the math is in feet and seconds: drop distances, muzzle energy and stopping distances all combine distance in feet with time in seconds, so ft/s drops straight in. Mph is a road unit, built for speedometers and hour-long trips, not for events that last a second or less.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.