Home › Converters › Fahrenheit to Kelvin

Fahrenheit to Kelvin

Lab reports, physics homework and spec sheets ask for kelvins, but your thermometer — like every American thermometer — reads Fahrenheit. This fahrenheit to kelvin converter bridges the two scales exactly, and also converts Celsius and Rankine, the other absolute scale. It even refuses temperatures below absolute zero, because they do not exist.

Fahrenheit to Kelvin table

Familiar Fahrenheit readings with their exact Kelvin values, computed with K = (°F − 32) × 5/9 + 273.15 and rounded to two decimals. The converter above also handles Celsius and Rankine — pick any two of the four scales in the From and To boxes.

Fahrenheit (°F)Kelvin (K)
-40 °F233.15 K
0 °F255.37 K
32 °F273.15 K
68 °F293.15 K
77 °F298.15 K
98.6 °F310.15 K
100 °F310.93 K
212 °F373.15 K
350 °F449.82 K
451 °F505.93 K

How it works

Fahrenheit and Kelvin measure the same thing from very different starting lines. Fahrenheit anchors itself to everyday life: water freezes at 32 °F and boils at 212 °F. Kelvin is the scientific scale, and it starts at the very bottom of nature — absolute zero, the coldest temperature that can exist, is 0 K. A kelvin is exactly the same size as a Celsius degree, which is why the conversion runs through Celsius: first turn the Fahrenheit reading into Celsius, then shift the zero point down to absolute zero by adding 273.15.

Fahrenheit to Kelvin: K = (°F − 32) × 5/9 + 273.15  |  Kelvin to Fahrenheit: °F = (K − 273.15) × 9/5 + 32  |  Celsius is the bridge: °C = (°F − 32) × 5/9 and K = °C + 273.15

The Amount box takes the temperature, the From and To lists set the scales — Fahrenheit and Kelvin are pre-selected — and the result updates as you type. The Swap units button reverses the conversion. Celsius and Rankine are in the lists too: Rankine is Kelvin's lesser-known twin, an absolute scale built on Fahrenheit-sized degrees, so 32 °F is 491.67 °R and absolute zero is 0 °R. It turns up in older American engineering work, especially thermodynamics.

The converter refuses temperatures below absolute zero — under −459.67 °F, 0 K or 0 °R — because they cannot exist. If you type one, you get an explanation instead of a meaningless number. Science users should also note the display precision: two decimals is the default because 273.15 is the figure lab work actually uses, but three decimals are available in the precision list for tighter work.

Worked example

A chemistry student in Illinois needs the freezing point of water in kelvins for a lab report. Her thermometer reading is in Fahrenheit: 32 °F.

Step 1: Subtract 32: 32 − 32 = 0.
Step 2: Multiply by 5/9: 0 × 5/9 = 0 — so 32 °F is 0 °C, as expected.
Step 3: Add 273.15: 0 + 273.15 = 273.15.
Step 4: Read the result — 273.15 K.

The converter shows exactly 273.15 K for 32 °F, with the Celsius midpoint spelled out on the line underneath. From the same anchor, the boiling point checks out too: 212 °F becomes 100 °C, then 373.15 K.

Common mistakes and tips

The classic error is forgetting the −32 step and scaling the raw Fahrenheit number: 32 °F wrongly run as 32 × 5/9 + 273.15 gives 290.93 K, nearly 18 degrees too warm — enough to wreck a lab result while looking perfectly plausible. Always shift to Celsius first. The second trap is adding 273 instead of 273.15, a shortcut from older textbooks. It makes every answer 0.15 low, which is invisible for weather and unacceptable for calibration or chemistry.

Two anchors make sanity checks instant: freezing is 273.15 K and body temperature is 310.15 K. If a converted value for an everyday temperature lands far outside the band between those, the arithmetic went wrong somewhere. And remember there are no negative kelvins — a result below zero is not a cold reading, it is a sign error.

FAQ

What is 32 degrees Fahrenheit in Kelvin?

32 °F is 273.15 K — the freezing point of water. The math: (32 − 32) × 5/9 = 0 °C, then 0 + 273.15 = 273.15 K. It is the anchor point where the Fahrenheit, Celsius and Kelvin scales all meet one simple set of numbers.

What is 98.6 °F in Kelvin?

98.6 °F is 310.15 K. Convert to Celsius first: (98.6 − 32) × 5/9 = 37 °C, normal body temperature, then add 273.15: 37 + 273.15 = 310.15 K.

What is the formula to convert Fahrenheit to Kelvin?

K = (°F − 32) × 5/9 + 273.15. It is a two-step trip: the first part converts Fahrenheit to Celsius (subtract 32, multiply by 5/9), and adding 273.15 then shifts the zero from the freezing point of water down to absolute zero.

What is absolute zero in Fahrenheit?

Absolute zero is −459.67 °F, which is 0 K. Nothing can be colder: it is the temperature at which molecular motion reaches its minimum, and this converter flags anything below it as impossible rather than inventing a negative Kelvin value.

Why does Kelvin not use a degree symbol?

By international agreement, the unit is simply the kelvin, symbol K — the degree sign was dropped in 1968. A temperature is written 273.15 K and said as '273.15 kelvins', unlike 32 °F or 0 °C, which keep their degree signs.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.