Home › Converters › Download Time Calculator
Download Time Calculator
A 50 GB game, a 4 GB movie, a software update — the question is always the same: can it finish before lunch, or should it run overnight? This download time calculator turns a file size and a connection speed into an exact wait: hours, minutes, and seconds, plus a plain-English estimate. Speeds can be entered the way plans are sold (Mbps) or the way download windows report them (MB/s), file sizes in decimal or binary units, and an efficiency setting accounts for the overhead every real connection has.
Convention used on this page: decimal file units (1 GB = 1,000 MB = 8,000 megabits), speed in bits per second. Time = file size in bits ÷ speed in bits per second.
Download time for this file at common speeds
The same file size you entered above, at the speeds most home and mobile plans advertise — assuming ideal efficiency.
| Connection speed | Download time | In seconds |
|---|
How it works
A download moves bits, not bytes, and that single fact drives the whole calculation. Your file size is first turned into bits: each byte is 8 bits, and the unit steps then multiply by 1,000 for the decimal units (KB, MB, GB, TB) or by 1,024 for the binary ones (KiB, MiB, GiB, TiB). Your speed is turned into bits per second the same way — megabits already are bits, while megabytes per second get multiplied by 8. Dividing the bits by the bits-per-second gives the time in seconds, which the page then formats as a clock time and a friendly sentence.
The convention matters and this page states it openly: by default the file size is decimal, because that is how download sites, game stores, and drive makers count — a "1 GB" file is 1,000,000,000 bytes, which is 8,000 megabits, which is exactly why it takes 80 seconds at 100 Mbps. If your size came from a Windows properties box, it was really gibibytes; pick GiB and the same file takes about 7.4% longer, because the binary unit is bigger. The efficiency selector then models reality: no connection delivers its headline rate end-to-end, so 90% is a fair setting for a good wired line and 80% for typical home Wi-Fi.
Worked example
A game patch is listed as 50 GB on the store page, and your plan is 200 Mbps. Step 1: enter 50 with the GB unit — decimal, matching the store. Step 2: enter 200 Mbps. Step 3: the patch is 50 × 8,000 = 400,000 megabits, and 400,000 ÷ 200 = 2,000 seconds. Step 4: read the result — 0:33:20, about 33 minutes at ideal speed. At the 90% efficiency setting the same patch takes about 37 minutes, which is the number worth planning a lunch break around.
Common mistakes
The classic mistake is comparing megabytes with megabits directly: a 100 MB file on a "100 meg" plan does not take one second, because the file is 800 megabits and needs 8 seconds. The second mistake is trusting the headline speed for a shared household line — three streaming TVs can halve what is left for your download, which the 70% efficiency setting approximates. Finally, remember upload is not download: sending the same file on a typical asymmetric plan (fast down, slow up) takes many times longer than receiving it.
FAQ
How long does it take to download 1 GB at 100 Mbps?
Using decimal units — 1 GB = 8,000 megabits — the download takes exactly 80 seconds (1 minute 20 seconds) at a perfect 100 Mbps. Real connections have overhead, so at 90% efficiency expect about 89 seconds.
Why is my download slower than the calculator says?
The headline figure assumes your full rated speed, end to end. Real downloads lose time to protocol overhead (typically 5–15%), Wi-Fi interference, a busy server at the other end, and other devices sharing the line. The efficiency selector models that loss: try 80–90% for a realistic home estimate.
What is the difference between Mbps and MB/s?
Mbps is megabits per second — the unit internet plans are sold in. MB/s is megabytes per second — the unit download managers show. One byte is 8 bits, so divide Mbps by 8: 100 Mbps is 12.5 MB/s at most. Confusing the two is why a '100 meg' line never shows 100 MB/s in a download window.
How long does a 50 GB game take to download?
It depends entirely on speed: at 25 Mbps about 4 hours 27 minutes, at 100 Mbps about 1 hour 7 minutes, at 300 Mbps about 22 minutes, and at a full gigabit about 6 minutes 40 seconds — all at ideal efficiency. Enter 50 GB above and the table shows the same figures for your exact size.
Should I enter file size in GB or GiB?
Use GB (decimal) if the size came from a store page, a download site, or a drive box — they all count 1 GB as 1,000 MB. Use GiB (binary) if the size came from a Windows file-properties box, which counts 1 GiB as 1,024 MiB but labels it GB. The binary file is about 7.4% bigger at this scale, so the download takes proportionally longer.