Home › Converters › Acres to Hectares

Acres to Hectares

A land listing, farm report or forestry survey gives you hectares, but every parcel you have ever bought, sold or fenced at home was measured in acres. This acres to hectares converter bridges the two instantly with the exact conversion factor, works in both directions, and also converts square feet, square yards, square meters, square miles and more, with a full breakdown of every equivalent on screen.

4.04686 hectares
10 acres × 0.40468564 = 4.04686 hectares  •  435,600 square feet
Acres10 acres
Hectares4.04686 hectares
Square feet435,600 square feet
Square meters40,468.56422 square meters
Square yards48,400 square yards
Square miles0.01563 square miles
Square kilometers0.04047 square kilometers

Acres to hectares conversion table

AcresHectaresSquare feet
0.250.1011710,890
0.50.2023421,780
10.4046943,560
20.8093787,120
2.471051107,638.938
52.02343217,800
104.04686435,600
2510.117141,089,000
4016.187431,742,400
5020.234282,178,000
10040.468564,356,000
250101.1714110,890,000
640258.9988127,878,400

How it works

The acre is the land unit of the United States and the United Kingdom: one acre is 43,560 square feet, the size of a football field without its end zones, give or take. The hectare is the metric land unit used almost everywhere else: exactly 10,000 square meters, a square 100 meters on each side. The Area box takes any area you type, the From list sets the unit you are starting with, and the To list sets the unit you want — acres and hectares are pre-selected, and the result updates as you type.

Everything on this page converts through square meters, so any pair of units in the two lists works: square feet to hectares for a building lot, square miles to acres for a ranch, and every other combination. The breakdown under the result shows the same area in seven units at once, and the Swap units button flips the two lists and converts back the other way.

Hectares = acres × 0.4046856422  |  Acres = hectares ÷ 0.4046856422  |  1 acre = 43,560 square feet · 1 hectare = 10,000 square meters = 2.47105 acres
The factor comes straight from the two definitions: an acre is 4,046.8564224 square meters and a hectare is 10,000 square meters, and 4,046.8564224 ÷ 10,000 = 0.40468564224, which this converter carries as 0.4046856422. A quick mental check: the hectare figure should always come out at roughly two-fifths of the acre figure, so if your answer got bigger instead of smaller, the direction got flipped.

Worked example

A family in Iowa is comparing their 10-acre parcel with a relative's farm in France that is listed in hectares, and they want their own land expressed the same way.

Step 1: Write down the area in acres — 10 acres.
Step 2: Use the exact factor — 1 acre = 0.4046856422 hectares.
Step 3: Multiply: 10 × 0.4046856422 = 4.046856422.
Step 4: Read the result — 4.04686 hectares.

Type 10 acres into the converter and it shows exactly that: 4.04686 hectares, with the breakdown confirming the same land is 435,600 square feet and 40,468.56422 square meters. The reverse works the same way — a 10-hectare French farm is 10 ÷ 0.4046856422 = 24.71054 acres.

Common mistakes and rounding

The classic mistake is using the rough "divide by two and a half" shortcut in the wrong direction, or worse, multiplying when you should divide. Because a hectare is the larger unit, converting acres to hectares must make the number smaller, and converting hectares to acres must make it bigger — if yours moved the wrong way, flip it. The second trap is mixing up hectares with square kilometers: a square kilometer is 100 hectares, so a decimal slip there changes the answer a hundredfold.

For a quick estimate, multiplying acres by 0.4 is close enough for conversation — 10 acres is about 4 hectares. For deeds, surveys and subsidy or tax paperwork, use the full factor this converter uses, and keep two or three decimals: at farm scale, the third decimal of a hectare is still about 10 square meters of real land.

FAQ

How many hectares is 1 acre?

1 acre is 0.40469 hectares (0.4046856422 exactly). To convert acres to hectares, multiply the acres by 0.4046856422 — so 10 acres is 4.04686 hectares and 100 acres is 40.46856 hectares.

How many acres are in 1 hectare?

1 hectare is 2.47105 acres. A hectare is 10,000 square meters, while an acre is 43,560 square feet, so the hectare is the bigger unit — about two and a half acres.

How many acres is 10 hectares?

10 hectares is 24.71054 acres. Multiply the hectares by 2.47105381 (10 x 2.47105381 = 24.71054), or divide them by 0.4046856422 instead.

Which is bigger, an acre or a hectare?

A hectare is bigger. One hectare equals 2.47105 acres, so a 50-hectare farm is 123.55269 acres. When a listing switches units, the number should get smaller going from acres to hectares and bigger going the other way.

How many square feet are in a hectare?

A hectare is 107,639.10417 square feet. That comes from 10,000 square meters divided by 0.09290304 square feet per square meter — roughly two and a half football fields of area, including the end zones.

Disclaimer: Results are conversions for guidance only. Values are rounded for display; for legal, medical, or safety-critical use, confirm with an official source or a qualified professional.